Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    C3000 and C5000 Installation Summary

    To install the C Series Controller:

    1. Prepare your installation site.

      See C3000 and C5000 Site Preparation Checklist.

    2. Review the safety guidelines and warnings.
    3. Unpack the controller and verify the parts.
      1. Unpacking the C Series Controller
      2. Verifying the C Series Controller Parts Received
    4. Install the mounting hardware if needed, and install the controller in a rack.
    5. Connect cables to the network and external devices:

      See Connecting the C Series Controllers to External Devices.

    6. Connect the AC power cord or DC power cables.
    7. Power on the controller.

      See Powering On the C Series C3000 or C5000 Controller.

    8. Perform the initial system configuration.

      See Performing the Initial Software Configuration for the C Series Controller.

    Published: 2014-06-12

    Previous Page Next Page