Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

C3000 and C5000 AC Power Cord Specifications

 

Each AC power supply has a single AC appliance inlet located on the power supply that requires a dedicated AC power feed. Most sites distribute power through a main conduit that leads to frame-mounted power distribution panels, one of which can be located at the top of the rack that houses the controller. An AC power cord connects each power supply to the power distribution panel.

The controller ships with detachable AC power cords, each approximately 8 ft (2.5 m) long that supply AC power to the controller. The C13 appliance coupler end of the cord inserts into the AC appliance inlet coupler, type C14 (right angle) as described by International Electrotechnical Commission (IEC) standard 60320. The plug end of the power cord fits into the power source receptacle that is standard for your geographical location. Table 1 provides specifications for the AC power cord provided for each country or region.

Table 1: AC Power Cord Specifications

Country

Model Number

Electrical Specification

Plug Type

Australia

CBL-GP-JX-PWR-AU

250 VAC, 10 A, 50 Hz

AS/NZ 3112–1993

China

CBL-GP-JX-PWR-CH

250 VAC, 10 A, 50 Hz

GB2099.1 1996 and GB1002 1996 (CH1-10P)

Europe (except Italy and United Kingdom)

CBL-GP-JX-PWR-EU

250 VAC, 10 A, 50 Hz

CEE (7) VII

Italy

CBL-GP-JX-PWR-IT

250 VAC, 10 A, 50 Hz

IEC60884-1

Japan

CBL-GP-JX-PWR-JP

125 VAC, 12 A, 50 Hz or 60 Hz

JIS 8303 and 8306

Korea

CBL-GP-JX-PWR-KR

250 VAC, 10 A, 50 Hz

KSC8305 and EN 60320 C13

North America

CBL-GP-JX-PWR-US

125 VAC, 10 A, 60 Hz

NEWA 5-15P

Switzerland

CBL-GP-JX-PWR-SZ

250 VAC, 10 A, 50 Hz

SEV 1011,1991, and EN 60320 C13

United Kingdom

CBL-GP-JX-PWR-UK

250 VAC, 10 A, 50 Hz

BS1363

Warning

The AC power cord for the controller is intended for use with the controller only and not for any other use.