Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    DC Power Cable Specifications for C Series Controllers

    DC Power Cable Lug Specifications

    To connect the DC power cables to the controller, you must use cable lugs that have the specifications shown in Figure 1.

    Figure 1: DC Power Cable Lug

    DC Power Cable Lug

    Caution: Before you install a C Series Controller, a licensed electrician must attach a cable lug to the power cables. A cable with an incorrectly attached lug can damage the controller.

    DC Power Cable Specifications

    You must use DC power cables that meet the following specifications: 14-12 AWG (1.9 mm2 minimum) wire, or as required by the local code.

    Published: 2014-06-12