Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    C Series System Description

    The C Series Controller enables you to easily install, configure, and support Juniper Networks Session and Resource Control (SRC) software. It provides easy access to troubleshooting information, such as reporting events, logs, and system dumps while providing session resource controller functionality.

    There are two C Series Controller models: the C3000 model and the C5000 model. Each model is composed of four hard drives, three fan modules, redundant power supplies, one USB port, a console management port, and four Ethernet ports.

    Both models use the same software. However, the specific model determines the number of service session licenses and concurrent subscribers allowed on each unit. (See Table 1.)

    Table 1: C Series Model Differences


    Concurrent Subscribers





    Note: The models illustrated in this book might look different from your model because of configuration variations.

    Figure 1: Front View of the C3000 Model

    Front View of the C3000 Model

    Figure 2: Front View of the C5000 Model

    Front View of the C5000 Model

    Figure 3: Rear View of the C3000 and C5000 Models

    Rear View of the C3000 and
C5000 Models

    Published: 2014-06-12