List of Figures

Figure 1: EX 3200 Switch Front Panel

Figure 2: EX 3200 Switch Rear Panel

Figure 3: EX 4200 Switch Front Panel

Figure 4: EX 4200-24F Switch Front Panel

Figure 5: EX 4200 Switch Rear Panel

Figure 6: EX-series Switch—Network Port LEDs

Figure 7: SFP Uplink Module

Figure 8: XFP Uplink Module

Figure 9: EX-series Switch—SFP Uplink Module Port LEDs

Figure 10: EX-series Switch—XFP Uplink Module Port LEDs

Figure 11: LCD on an EX-series Switch

Figure 12: EX-series Switch—Network Port LEDs

Figure 13: 320 W Power Supply

Figure 14: 600 W and 930 W Power Supply

Figure 15: Fan Tray Used in an EX 3200 Switch

Figure 16: Airflow Through the EX 3200 Switch Chassis

Figure 17: Fan Tray Used in an EX 4200 Switch

Figure 18: Airflow Through the EX 4200 Switch Chassis

Figure 19: Clearance Requirements for Airflow and Hardware Maintenance

Figure 20: Airflow Through the EX 3200 Switch Chassis

Figure 21: Airflow Through the EX 4200 Switch Chassis

Figure 22: AC Plug Types

Figure 23: Unpacking an EX-series Switch

Figure 24: Attaching Mounting Brackets Along the Front of an EX-series Switch

Figure 25: Attaching Rubber Feet to the EX-series Switch Chassis

Figure 26: Attaching Mounting Brackets Along the Front of an EX-series Switch

Figure 27: Mounting an EX-series Switch Chassis on a Rack

Figure 28: EX 4200 Switches Virtual Chassis—Mounted on a Single Rack and Connected in a Ring Topology—Short and Long Cables, Option 1

Figure 29: EX 4200 Switches Virtual Chassis—Mounted on a Single Rack and Connected in a Ring Topology—Short and Long Cables, Option 2

Figure 30: EX 4200 Switches Virtual Chassis—Mounted on a Single Rack and Connected in a Ring Topology—Short and Medium Cables

Figure 31: EX 4200 Switches Virtual Chassis—Mounted on Adjacent Racks and Connected in a Ring Topology—Medium and Long Cables, Option 1

Figure 32: EX 4200 Switches Virtual Chassis—Mounted on Adjacent Racks and Connected in a Ring Topology—Medium and Long Cables, Option 2

Figure 33: EX 4200 Switches Virtual Chassis—Mounted on Adjacent Racks and Connected in a Chain Topology—Medium Cables

Figure 34: Connecting a Grounding Cable to an EX-series Switch

Figure 35: Connecting the Power Cord Retainer Clip to a Power Supply in an EX-series Switch Chassis

Figure 36: Connecting Power Cord to a Power Supply in an EX-series Switch Chassis

Figure 37: Connecting an EX 3200 Switch to a Network for Out-of-Band Management

Figure 38: Connecting an EX 4200 Switch to a Network for Out-of-Band Management

Figure 39: Ethernet Cable Connector

Figure 40: Connecting an EX 3200 Switch to a Management Console

Figure 41: Connecting an EX 4200 Switch to a Management Console

Figure 42: Ethernet Cable Connector

Figure 43: Connecting a Virtual Chassis Cable to an EX-series Switch

Figure 44: LCD Panel

Figure 45: Sliding the Screwdriver to the Narrow Part of the Keyhole

Figure 46: Removing an Uplink Module from an EX-series Switch

Figure 47: Removing an SFP or XFP Transceiver from an EX-series Switch

Figure 48: Removing an AC Power Supply from an EX-series Switch

Figure 49: Removing a Fan Tray from an EX 3200 Switch

Figure 50: Removing a Fan Tray from an EX 4200 Switch

Figure 51: Disconnecting a Virtual Chassis Cable from an EX-series Switch

Figure 52: Location of the Serial Number Label on EX 3200 Switches

Figure 53: Location of the Serial Number Label on EX 4200 Switches

Figure 54: EX 3200 Switch Rear Panel

Figure 55: EX 4200 Switch Rear Panel

Figure 56: Place a Component into an Electrostatic Bag