[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Connecting an EX-series Switch to a Network for Out-of-Band Management

EX-series switches have an out-of-band management port with an RJ-45 connector on the rear panel. If you need to monitor and manage an EX-series switch using a dedicated management channel, you can use the out-of-band management port to connect the EX-series switch to the management device.

Ensure you have an Ethernet cable with an RJ-45 connector available. One such cable is provided with the switch. Figure 39Figure 42 shows the RJ-45 connector of the Ethernet cable supplied with the switch.

To connect an EX-series switch to a network for out-of-band management (see Figure 37 and Figure 38):

  1. Connect one end of the Ethernet cable to the management port (labelled MGMT) on the rear panel of the EX-series switch.
  2. Connect the other end of the Ethernet cable to the network device.

Figure 37: Connecting an EX 3200 Switch to a Network for Out-of-Band Management

Image g020057.gif

Figure 38: Connecting an EX 4200 Switch to a Network for Out-of-Band Management

Image g020087.gif

Figure 39: Ethernet Cable Connector

Image g001063.gif

Related Topics


[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]