Detachable AC power cords are supplied with the switch. The appliance coupler at the female end of the cord inserts into the AC appliance inlet on the faceplate of the AC power supply. The coupler is type C19 as described by International Electrotechnical Commission (IEC) standard 60320. The plug at the male end of the power cord fits into the power source outlet that is standard for your geographical location.
 |
Note: In North America, AC power cords must not exceed 4.5 meters (approximately 14.75 feet) in length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical Code (CEC) Section 4-010(3). The cords supplied with the switch are in compliance. |
Table 26 lists AC power cord specifications provided for each country or region.
Table 26: AC Power Cord Specifications
Figure 22 illustrates the plug on the power cord for each country or region listed in Table 26.
Figure 22: AC Plug Types
|
Note: The AC power cord for the EX-series switch is intended for use with the switch only and not for any other use. |