EX-series Switch—XFP Uplink Module Port LEDs

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

The ports on the 10-Gigabit small-form factor pluggable transceiver (XFP) uplink module have two LEDs. Figure 10 shows the XFP uplink module port and the location of the LEDs on the port.

The LEDs labeled LED 1 in Figure 10 indicate link status, and the LEDs labeled LED 2 in Figure 10 indicate the status of one of the four port parameters. The port parameters are: administrative status; duplex mode; PoE status; and speed.

Figure 10: EX-series Switch—XFP Uplink Module Port LEDs

Image g020108.gif

Table 10 describes LED 1.

Table 10: EX-series Switch—XFP Uplink Module Port LEDs–LED 1

LED	Color	State and Description
LED 1	Unlit	No link activity.
LED 1	Green	On steadily—The port is up and the link is active, but there is no link activity. Blinking—The port is up, with active links.

Table 11 describes LED 2, which indicates the administrative status (enabled or disabled), duplex mode, PoE status, or speed, of the XFP uplink module ports. From the Idle menu of the LCD, use the Enter button on the LCD panel to toggle between the ADM, DPX, POE, and SPD indicators.

Table 11: EX-series Switch—XFP Uplink Module Port LEDs–LED 2

LED	LCD Indicator	State and Description
LED 2	LED: ADM	Indicates the administrative status (enabled or disabled). The status indicators are: Green—Administrative status enabled Unlit—Administrative status disabled
	LED: DPX	Indicates the duplex mode. The XFP uplink module ports are always set to full-duplex; therefore, the LED is always green.
	LED: POE	Indicates the PoE status. PoE is not enabled on XFP Uplink Module Port; therefore, the LED is always unlit.
	LED: SPD	Indicates the speed. The speed of the XFP uplink module ports is always 10 Gbps; therefore, the LED is always green.

EX-series Switch—XFP Uplink Module Port LEDs

Related Topics