Module label SFM-320 IOA label
- Not applicable
Number of IOA ports
- Not applicable
Software release
- First supported: 7.3.0
Description
- 95 W
- Switch fabric module (320 Gbps)
- Works with the SRP-320 module to create a switch fabric
- The 320–Gbps fabric allocates 10 Gbps of overall bandwidth to each line module slot.
- Must be installed only with SRP-320 module and SFM–320 modules
Capability
- Not applicable
Software features
- Not applicable
Line module compatibility
- ES2 4G LM
- ES2 10G UPLINK LM
SRP module compatibility
- SRP-320
- Cannot use with SRP-100 module or SFM-100 module
Module redundancy support
- N+1 redundancy
Port redundancy support
- Not applicable
Cables and connectors
- Not applicable
LEDs When lit, LED indicates:
- OK (green)—Self-test passed
- FAIL (red)—Failure detected
- ONLINE (green)—Online with no alarms or errors
- REDUN (green)—N+1 redundancy is enabled; 2 SRPs and 3 SFMs must be installed and working. When LED is unlit, one of the five fabric slices is down or not installed; N+1 redundancy is not enabled.
Note: When REDUN LED is on, the module may be removed without interrupting service.
Alarms, errors, and events
- See Monitoring Modules in JUNOSe System Basics Configuration Guide, Chapter 6, Managing Modules.