[Contents] [Prev] [Next] [Report an Error]

Channelized T1 and E1 Modules

Table 3: Channelized T1 and E1 Modules

Accepts traffic destined for GRE tunnels or DVMRP (IP-in-IP) tunnels

Yes

Yes

APS/MSP

No

No

ATM (point-to-point)

No

No

BERT

Yes

Yes

BGP

Yes

Yes

BGP/MPLS VPNs

Yes

Yes

Bridged Ethernet

No

No

Bridged IP

No

No

CBF

No

No

Cisco HDLC

Yes

Yes

DHCP external server

No

No

DHCP local server

No

No

Dynamic interfaces

No

No

F4 OAM and F5 OAM (ATM administration)

No

No

FDL (facilities data link)

Yes

No

Firewall

Yes

Yes

Frame Relay

Yes

Yes

IEEE 802.3ad link aggregation

No

No

IP

Yes

Yes

IP multicast

No

No

IP reassembly for tunneled packets

No

No

IPSec

No

No

IPv6

No

No

IPv6 multicast

No

No

IPv6 neighbor discovery

No

No

IS-IS

Yes

Yes

J-Flow Statistics

No

No

LAC support—access side

No

No

LAC support—peer side

No

No

LNS support—peer side

No

No

Local loopback

Yes (T1 layer with AIS)

No

MDL (maintenance data link)

Yes (T1 layer)

No

MPLS

Yes

Yes

Multilink Frame Relay

Yes

Yes

Multilink PPP

Yes

Yes

Network Address Translation (NAT)

No

No

NBMA (multipoint ATM)

No

No

OSPF

Yes

Yes

Packet Mirroring

No

No

Packet over SONET

No

No

PPP

Yes

Yes

PPPoE

No

No

Remote loopback

Yes

No

RIP

Yes

Yes

SMDS (trunk encapsulation)

No

No

Subscriber interfaces (static)

No

No

Subscriber interfaces (dynamic)

No

No

Transparent bridging

No

No

Tunnel-server ports

No

No

VRRP

No

No


[Contents] [Prev] [Next] [Report an Error]