T3 ATM Module Combination (4 Ports)

Line module label OCx/STMx ATM or OCx/STMx /DS3-ATM
I/O module label 4xDS3 ATM I/O
Number of I/O ports
4
Software release
First supported release: 4.1.0 (128 MB), 5.0.0 (256 MB)
Final supported (release or date): 2017-01-31
Description
130 W
Can use either the 128-MB OCx/STMx ATM line module or the 256-MB OCx/STMx /DS3-ATM line module.
Unchannelized T3 for ATM
Type
EFA ASIC
Capability
ATM/AAL5
Software features
See ERX Module Guide, Appendix A, Module Protocol Support for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility
ERX7xx models
ERX14xx models
ERX310 router
SRP module compatibility
SRP-5G+
SRP-10G
SRP-40G
SRP-40G PLUS
SRP-SE10G
Module redundancy support
1:N redundancy
Cables and connectors
75-ohm connector
The line interface unit supports two line buildouts:
0–68.5 m (0–225 feet)
69–137 m (226–450 feet)
Signal strength is software controlled.
The transmitted signal complies with ANSI T1.102-1993 Digital Hierarchy - Electrical Interfaces (1999) for cable lengths up to 201 m (660 feet).
LEDs
See ERX Module Guide, Appendix B, Module LEDs.
Alarms, errors, and events
See Monitoring Interfaces in JunosE Physical Layer Configuration Guide, Chapter 2, Configuring T3 and E3 Interfaces.

Line module label	OCx/STMx ATM or OCx/STMx /DS3-ATM
I/O module label	4xDS3 ATM I/O
Number of I/O ports	4
Software release	First supported release: 4.1.0 (128 MB), 5.0.0 (256 MB) Final supported (release or date): 2017-01-31
Description	130 W Can use either the 128-MB OCx/STMx ATM line module or the 256-MB OCx/STMx /DS3-ATM line module. Unchannelized T3 for ATM
Type	EFA ASIC
Capability	ATM/AAL5
Software features	See ERX Module Guide, Appendix A, Module Protocol Support for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX7xx models ERX14xx models ERX310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	1:N redundancy
Cables and connectors	75-ohm connector The line interface unit supports two line buildouts: 0–68.5 m (0–225 feet) 69–137 m (226–450 feet) Signal strength is software controlled. The transmitted signal complies with ANSI T1.102-1993 Digital Hierarchy - Electrical Interfaces (1999) for cable lengths up to 201 m (660 feet).
LEDs	See ERX Module Guide, Appendix B, Module LEDs.
Alarms, errors, and events	See Monitoring Interfaces in JunosE Physical Layer Configuration Guide, Chapter 2, Configuring T3 and E3 Interfaces.