OC3/STM1 ATM Multimode Without APS/MSP Redundancy Module Combination (128 MB)

This module combination is no longer supported because the line module has reached end-of-life. However, the I/O module is still supported.

Line module label OCx/STMx ATM or OCx/STMx /DS3-ATM
I/O module label OC3-4 I/O
MULTI MODE
Number of I/O ports
4
Software release
First supported: 2.0.0
Final supported: 5.2.x
Description
130 W
Unchannelized, concatenated OC3/STM1 for ATM
Type
ASIC
Capability
OC3/STM1
ATM:AAL5
Software features
See ERX Module Guide, Appendix A, Module Protocol Support for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility
ERX7xx models
ERX14xx models
ERX310 router
SRP module compatibility
SRP-5G+
SRP-10G
SRP-40G
SRP-40G PLUS
SRP-SE10G
Module redundancy support
1:N redundancy
NOTE: Line module redundancy is not supported on the ERX310 router.
Cables and connectors
SC full duplex connector
Tx power:
min: –19 dBm
max: –14 dBm
Center wavelength: 1310 nm
Rx input power:
min: –30 dBm
max: –14 dBm
Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs
See ERX Module Guide, Appendix B, Module LEDs.
Alarms, errors, and events
See Monitoring SONET/SDH Interfaces in the Configuring Unchannelized OCx/STMx Interfaces chapter of the JunosE Physical Layer Configuration Guide for Release 8.0.x and earlier.

Line module label	OCx/STMx ATM or OCx/STMx /DS3-ATM
I/O module label	OC3-4 I/O MULTI MODE
Number of I/O ports	4
Software release	First supported: 2.0.0 Final supported: 5.2.x
Description	130 W Unchannelized, concatenated OC3/STM1 for ATM
Type	ASIC
Capability	OC3/STM1 ATM:AAL5
Software features	See ERX Module Guide, Appendix A, Module Protocol Support for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX7xx models ERX14xx models ERX310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	1:N redundancy NOTE: Line module redundancy is not supported on the ERX310 router.
Cables and connectors	SC full duplex connector Tx power: min: –19 dBm max: –14 dBm Center wavelength: 1310 nm Rx input power: min: –30 dBm max: –14 dBm Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See ERX Module Guide, Appendix B, Module LEDs.
Alarms, errors, and events	See Monitoring SONET/SDH Interfaces in the Configuring Unchannelized OCx/STMx Interfaces chapter of the JunosE Physical Layer Configuration Guide for Release 8.0.x and earlier.