FE-8 Module Combination (8 Ports) (128 MB)

This module combination is no longer supported because the line module has reached end-of-life. However, the I/O module is still supported.
Line module labelGE/FE
I/O module labelFE-8 I/O
Number of I/O ports
  • 8
Software release
  • First supported: 2.0.0
  • Final supported: 5.2.x
  • 130 W
  • Fast Ethernet
  • ASIC
  • IEEE 802.3 standards compliance
  • 10/100Base-T
Software features
  • See ERX Module Guide, Appendix A, Module Protocol Support for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility
  • ERX7xx models
  • ERX14xx models
  • ERX310 router
SRP module compatibility
  • SRP-5G+
  • SRP-10G
  • SRP-40G
  • SRP-40G PLUS
  • SRP-SE10G
Module redundancy support
  • Not applicable
Cables and connectors
  • RJ-45 connectors
  • For 10-Mbps operation, use CAT 3, 4, or 5 UTP cable.
  • For 100-Mbps operation, use only CAT 5 UTP cable.
  • The transmitted signal complies with IEEE 802.3/802.3u for cable lengths up to 100 m (328 feet).
  • See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • See ERX Module Guide, Appendix B, Module LEDs.
Alarms, errors, and events
  • See Monitoring Ethernet Interfaces in the Configuring Ethernet Interfaces chapter of the JunosE Physical Layer Configuration Guide for Release 8.0.x and earlier.