OC12/STM4 ATM Single-Mode Long Reach With APS/MSP Redundancy Module Combination

Line module label OCx/STMx ATM or OCx/STMx /DS3-ATM
I/O module label OC12 STM4 APS
LONG HAUL
Number of I/O ports
1 active, 1 redundant
Software release
First supported: 2.0.0 (128 MB), 5.0.0 (256 MB)
Final supported: Not applicable
The OCx/STMx ATM line module or the OCx/STMx /DS3-ATM line module must have a minimum of 256 MB of memory to be used with JunosE Release 5.3.0 or a higher-numbered release.
Description
130 W
Can use either the 128-MB OCx/STMx ATM line module or the 256-MB OCx/STMx /DS3-ATM line module.
Unchannelized, concatenated OC12/STM4 for ATM
Type
EFA ASIC
Capability
OC12/STM4
ATM/AAL5
Software features
See OCx/STMx ATM Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility
ERX7xx models
ERX14xx models
ERX310 router
SRP module compatibility
SRP-5G+
SRP-10G
SRP-40G
SRP-40G PLUS
SRP-SE10G
Module redundancy support
1:N redundancy
NOTE: Line module redundancy is not supported on the ERX310 router.
Cables and connectors
SC full duplex
Tx power:
min: –5.0 dBm
max: 0 dBm
Center wavelength: 1310 nm
Rx input power:
min: –34 dBm
max: –7 dBm
Fiber type: 9-micron core
Rated for 40 km (24.8 miles) of 9-micron core cable
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs
See Module LEDs.
Alarms, errors, and events
See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces.

Line module label	OCx/STMx ATM or OCx/STMx /DS3-ATM
I/O module label	OC12 STM4 APS LONG HAUL
Number of I/O ports	1 active, 1 redundant
Software release	First supported: 2.0.0 (128 MB), 5.0.0 (256 MB) Final supported: Not applicable The OCx/STMx ATM line module or the OCx/STMx /DS3-ATM line module must have a minimum of 256 MB of memory to be used with JunosE Release 5.3.0 or a higher-numbered release.
Description	130 W Can use either the 128-MB OCx/STMx ATM line module or the 256-MB OCx/STMx /DS3-ATM line module. Unchannelized, concatenated OC12/STM4 for ATM
Type	EFA ASIC
Capability	OC12/STM4 ATM/AAL5
Software features	See OCx/STMx ATM Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX7xx models ERX14xx models ERX310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	1:N redundancy NOTE: Line module redundancy is not supported on the ERX310 router.
Cables and connectors	SC full duplex Tx power: min: –5.0 dBm max: 0 dBm Center wavelength: 1310 nm Rx input power: min: –34 dBm max: –7 dBm Fiber type: 9-micron core Rated for 40 km (24.8 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See Module LEDs.
Alarms, errors, and events	See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces.