You may want to consult the document GR-63 (LSSGR, FD-15): Network Equipment Building System (NEBS) Requirements: Physical Protection, Issue 1, October 1995 for additional cable recommendations.
Comply with the following recommendations:
- Use only shielded cables.
- Ensure that cable distance and rate limits meet IEEE-recommended maximum speeds and distances for signaling purposes. For information about attenuation and power loss in optical fiber cables see:
- ANSI T1.646a-1997: Telecommunications - Broadband ISDN - Physical Layer Specification for User-Network Interfaces Including DS1/ATM (1997)
- ANSI T1.646-1995: Telecommunications - Broadband ISDN - Physical Layer Specification for User-Network Interfaces Including DS1/ATM (1995)
- AT&T (Lucent) Technical Note Power Margin Analysis (November 1995)
- Ensure that power cables deliver sufficient power to the system.
- In accordance with IEC 825-1, Safety of Laser Products - Part 1, laser fiber connectors are for connection only to Class 1 laser devices.
- Route cables so that they do not restrict ventilation or airflow.
- Route cables so that modules and field-replaceable units are easily accessible.
- Route cables in a logical direction to prevent loss of connectivity to other equipment in the rack, associated equipment in adjacent racks, or to the backbone network.
- Consider using cable-management brackets to keep network cables untangled and orderly and to prevent cables from hindering access to other slots.
- For specifications on cables for line modules, see Appendix B, Module Specifications.