Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Installing the Junos Pulse Gateway in a Rack

    The Junos Pulse Gateway is shipped in a cardboard carton and also contains an accessory box.

    Note: The device is maximally protected inside the shipping carton. Do not unpack it until you are ready to begin installation.

    Store the shipping carton box and packing material in case you need to return or move the device at a later time.

    You can mount the MAG4610, MAG6610 and MAG6611:

    • On four posts in a 19-in. rack or cabinet by using the mounting brackets provided with the Junos Pulse Gateway.

      Note: Due to the size and weight of the Junos Pulse Gateway, Juniper Networks recommends you four post mount the chassis and not front mount only.

    • In a position recessed 2 in. from the front of a 19-in. rack or cabinet by using the mounting brackets provided with the Junos Pulse Gateway. You can mount the chassis in this recessed position on four-post racks and cabinets.

    The holes in the mounting brackets are placed at 1 U (1.75 in. or 4.45 cm) apart so that the Junos Pulse Gateway can be mounted in any rack or cabinet that provides holes spaced at that distance.

    • If you are installing multiple devices in one rack, install the lowest one first and proceed upward in the rack.

    Published: 2011-07-25