Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Installing a Fan Assembly in the MAG6610 and MAG6611

    The fan tray is a hot-insertable and hot-removable field-replaceable unit (FRU) for the MAG6610 and MAG6611; you can remove and replace the fan tray while the Junos Pulse Gateway is running without turning off power to the Junos Pulse Gateway.

    Note: Service modules are paired with fan trays and hard drives. When moving a service module to a different slot, you must move the associated fan trays and hard drives to the new location as well.

    Before you install a fan try in the Junos Pulse Gateway, ensure you understand how to prevent ESD damage.

    To install a fan tray in a Junos Pulse Gateway:

    1. Attach the electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to the ESD point on the chassis.
    2. Hold the handles of the fan tray and align the tray with the fan tray guides on the fan tray slot.
    3. Slide in the fan tray until it is fully seated in the chassis.

    Published: 2011-07-25