Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Maintaining the Junos Pulse Gateway Hardware Components

    Table 1 describes the common tasks to maintain the hardware components of the Junos Pulse Gateway.

    Table 1: Maintenance Procedures for the Junos Pulse Gateway Hardware Components

    Maintenance Procedure

    Procedure

    Routine Maintenance Procedures

    To maintain optimum performance of the Junos Pulse Gateway, you should regularly perform the following preventive maintenance procedures:

    • Inspect the installation site for moisture, loose wires or cables, and excessive dust.
    • Make sure that airflow is unobstructed around the device and into the air intake vents.
    • Check the Status LED on the front panel of the MAG2600 or the service module on all other Junos Pulse Gateway models.

    Maintaining the Cooling System

    The Junos Pulse Gateway cooling system works to maintain an optimal temperature for the device. If the fan controller fails, the device temperature will exceed the maximum working temperature and the device will fail. Ensure that you maintain the recommended clearances behind the device to enable the cooling system to function optimally.

    Maintaining the Power Supply

    To maintain the power supply on the Junos Pulse Gateway:

    • Make sure that the power and grounding cables are arranged so that they do not obstruct access to other device components.
    • Periodically inspect the site to ensure that the grounding and power cables connected to the device are securely in place and that there is no moisture accumulating near the device.

    Caution: We recommend using a surge protector for the power connection.

    Published: 2011-07-25