View Inventory Reports

Paragon Automation enables you to generate and view Inventory reports that provide details of the hardware inventory in the network. For information on the types of Inventory reports and how to generate them, see Inventory Reports Overview.

To access the page for to a specific Inventory report, select Reports > Inventory > Report-Name.

You can perform the following actions on this page:

View the following Inventory reports:
- Devices, see Table 1.
- Device Parts, see Table 2.
- Line Cards, see Table 3.
- Line Cards Usage, see Table 4.
- Miscellaneous Parts, see Table 5.
- Physical Interfaces, see Table 6.
- Transceivers, see Table 7.
Download a report—Hover over the Download button on the top-right corner of the report and select either CSV or JSON to download the report as a comma-separated values file (CSV) or JavaScript Object Notation (JSON) file, respectively.
Show or hide columns in a report—Click the vertical ellipsis icon at the top-right corner of the report and select the columns that you want displayed in the report.

Only the columns that you selected are displayed.

Table 1 explains the fields displayed in the Devices report.

Table 1: Devices Report
Field	Description
Device Name	Name of the device present in the network.
Vendor	Name of the device vendor. Example: Juniper
IP Address	IPv4 address of the device.
Source	Filename of the configuration file from where the device details are collected.
System Name	System name for the device.
Description	Description for the device.
Contact	Contact name for the device.
Location	Physical location of the device.
Last update by CLI	Date (in MM:DD:YYYY format) and time (in HH:MM:SS 12-hour or AM/PM format) at which the configuration file was last updated as a result of device collection.
Chassis Type	Type of chassis. Example: WS-C6509-E
Hardware Version	Hardware revision model of the chassis.
Hardware ID	Serial number of the chassis.
ROM Version	ROM monitor version.
ROM System Version	ROM system software version.
Configuration Register	SNMP configuration register value.
Memory	RAM (in bytes) available to the CPU.
Configuration Memory	Non-volatile configuration memory available, in bytes.
Configuration Memory In Use	Non-volatile configuration memory used, in bytes.
Boot Image	Information related to the boot image. Example: a string starting with flash:, bootflash:, disk0:
Processor	Processor used in the device. Example: PowerPC405
OS Version	Version of OS that is currently installed on the device.
Management IP Address	Management IP Address that is used by Paragon Planner to discover the device.
Model	Additional details not known from the vendor, for example, by distinguishing JUNIPER and JUNIPER_EX.
OS Family	OS family to which the device belongs. Example: JUNOS
Last Update by SNMP	Date (in MM:DD:YYYY format) and time (in HH:MM:SS 12-hour or AM/PM format) at which the configuration file was last updated as a result of SNMP collection.
Hostname	Hostname of the device.
IPv6	IPv6 address of the device, if any.
AS	Autonomous system (AS) number assigned to the device.

Table 2 explains the fields displayed in the Device Parts report.

Table 2: Device Parts Report
Field	Description
Name	Name of the device part.
Device Name	Name of the device to which this part belongs.
Vendor	Name of the device vendor. Example: Juniper
IP Address	IP address of the device to which the part belongs.
Part	Part number associated with the device part.
Serial Number	Serial number of the device part.
Description	Description for the device part.
Estimated Cost	Estimated cost of the device part.
Hostname	Hostname of the device.
AS	AS number assigned to the device.
Model	Additional details not known from the vendor, for example, by distinguishing JUNIPER and JUNIPER_EX.
Card ID	Location of the card on the device. Example: S-0/1

Table 3 explains the fields displayed in the Line Cards report.

Table 3: Line Cards Report
Field	Description
Card Name	Name of the line card. For example: WS-X6704-10GE
Device Name	Name of the device to which this part belongs.
Vendor	Name of the device vendor. Example: Juniper
IP Address	The IP address of the device to which the part belongs.
Card ID	Location of the card on the device. Example: S-0/1
Connected Ports	Sum of the number of ports that meet one or more of the following conditions: Number of ports that have a corresponding link in the model. Number of ports that are operationally up. Number of ports that have an IP address defined on the interface.
Reserved Ports	Number of reserved ports in the line card. A port is considered reserved if the interface description in the configuration file contains one or more of the following keywords: `Reserved` `Booked` `Spare`
Shutdown Ports	Number of ports that have operational status or administrative status as Down.
Port Count	Number of ports on the line card.
Part	Part number of the line card.
Serial number	Serial number of the line card.
FRU Line Cards	Name of the field-replaceable unit (FRU) line card (applicable only to Cisco devices).
FRU Route Memory	Route memory allocated to the FRU (applicable only to Cisco devices).
FRU Packet Memory	Packet memory allocated to the FRU (applicable only to Cisco devices).
L3 Engine Type	Type of L3 Engine (applicable only to Cisco devices).
L3 Engine	Details related to the L3 engine (applicable only to Cisco devices).
TAN	Top Assembly Number (TAN) or ordering number (applicable only to Cisco devices).
Description	Description for the line card.
Controller Memory	Controller memory (applicable only to Cisco devices).
Estimated Cost	Estimated cost of the line card.
Management IP Address	Management IP Address that is used by Paragon Planner to discover the device.
Version	Line card version information. Example: rev A0 ver 4
Hostname	Hostname of the device.
Operational State	Operational state of the device.
Admin State	Administrative state of the device.
AS	AS number assigned to the device.

Table 4 explains the fields displayed in the Line Cards Usage report.

Table 4: Line Cards usage Report
Field	Description
Card Name	Name of the line card. For example: WS-X6704-10GE
Device Name	Name of the device to which this part belongs.
Card ID	Location of the card on the device. Example: S-0/1
Connected Ports	Sum of the number of ports that meet one or more of the following conditions: Number of ports that have a corresponding link in the model. Number of ports that are operationally up. Number of ports that have an IP address defined on the interface.
Reserved Ports	Number of reserved ports, based on the customizable keywords found in the description in the configuration file.
Shutdown Ports	Number of ports that have operational status or administrative status as Down.
Number of Ports	Number of ports on the line card.
Hostname	Hostname of the device.

Table 5 explains the fields displayed in the Miscellaneous Parts report.

Table 5: Miscellaneous Parts Report
Field	Description
Name	Name of the device part. Example: Power supply, fan, display
Device Name	Name of the device to which this part belongs.
Vendor	Name of the device vendor. Example: Juniper
IP Address	IP address of the device to which the part belongs.
Part	Part number associated with the device part.
Serial Number	Serial number of the device part.
Description	Description for the device part.
Estimated Cost	Estimated cost of the device part.
Hostname	Hostname of the device.
AS	AS number assigned to the device.
Model	Additional details not known from the vendor, for example, by distinguishing JUNIPER and JUNIPER_EX.
Card ID	Location of the card on the device. Example: S-0/1

Table 6 explains the fields displayed in the Physical Interfaces report.

Table 6: Physical Interfaces Report
Field	Description
Interface	Name of the physical interface. Example: GigabitEthernet0/0/0/0
Device Name	Name of the device that contains the physical interface.
Vendor	Name of the device vendor. Example: Juniper
IP Address	IP address of the physical interface.
Admin Status	Administrative status (active, down, or unknown) of the physical interface.
IP Addr	Loopback IP address of the device, typically the first IP address in the IP address range is listed.
Media Type	Media type for the physical interface. Example: Ethernet, FE, GE
MTU	Maximum Transmission Unit (MTU) of the physical interface.
Bandwidth	Bandwidth of the physical interface. Example: 1000.0M
Physical Address	Physical address (MAC address) for the physical interface.
Operational Status	Operational status (Active, Down, or Unknown) of the physical interface.
Description	Description for the physical interface.
IPv6	IPv6 address of the physical interface, if any.
Management IP Address	Management IP Address that is used by Paragon Planner to discover the device.
Card ID	Location of the card on the device. Example: S-0/1
Aggregated Link	Aggregated link (if any) associated with the physical interface. Example: PortChannel, Bundle-Ether
VLAN	List of VLANs on the physical interface. Example: 22 100-102 105-108
Switchport Mode	Switchport mode for layer 2 interfaces. Example: Access or Trunk
Hostname	Hostname of the device.
AS	AS number assigned to the device.

Table 7 explains the fields displayed in the Transceivers report.

Table 7: Transceivers Report
Field	Description
Name	Name of the transceiver. Example: SFP-10GBase-ER
Device Name	Name of the device.
Vendor	Name of the device vendor. Example: Juniper
IP Address	Loopback IP address of the device, typically the first IP address in the IP address range is listed.
Index	Location of the card on the device. Example: S-0/1
Part	The part number associated with the transceiver.
Serial Number	Serial number of the transceiver.
Estimated Cost	Estimated cost of the transceiver.
Hostname	Hostname of the device.
AS	AS number assigned to the device.
ContainedIn	Name of the line card that contains the transceiver.

View Inventory Reports

Related Documentation