Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Edit P2MP Group Parameters

To edit the parameters of a P2MP group:

  1. Click Network > Topology.

    The Topology page is displayed with the topology map at the center and the network information table at the bottom of the page.

  2. Hover over the More Tabs list and select P2MP Group.

    The P2MP Group tab appears.

  3. Select the P2MP group that you want to edit and click the edit (pencil) icon.

    The Edit P2MP Group page appears on the right.

  4. Configure the P2MP group parameters as per Fields on the Add P2MP Group Page.
    Note:

    • You cannot edit the Provisioning Method, Provision Type, P2MP Group Name, and Node A field values.

    • The Service tab is only displayed if you are modifying a PCEP-provisioned P2MP group with service mapping.

  5. Click Edit.

    A confirmation message appears stating that the edit P2MP Group request is successfully sent.

Note:

If the sub-LSPs tab in the network information table fails to update after modifying P2MP group or sub-LSP attributes, you can close the sub-LSPs tab and reopen it to refresh the display. You can also use the refresh button at the bottom of the table that turns orange when prompting you for a refresh. When you click the refresh button, the Web UI client retrieves the latest P2MP sub-LSP status from the server.

Related Documentation