Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Additional Features

We've extended support for the following features to these platforms:

  • EVPN E-LAN over SRv6 (ACX7100-32C, ACX7100-48L, ACX7332, ACX7348, ACX7509, and ACX7024)

    [See EVPN E-LAN over SRv6.]

  • NIST purge method for media sanitization (ACX7024, ACX7024X, ACX7100-32C, ACX7332, PTX10001-36MR, PTX10002-36QDD, PTX10003, PTX10008, QFX5700, and QFX5700E). We've extended support for NIST media sanitization for SATA hard disk drives to include:

    • Cryptographic scramble and block erase priorities for the purge method.

    • Enhanced secure erase priority for the clear method.

    [See NIST Special Publication 800-88, Guidelines for Media Sanitization and request system zeroize.]

  • Support for asymmetric EVPN Type 5 routes (ACX7100-32C, ACX7100-48L, ACX7024, ACX7024X, ACX7332, ACX7348, and ACX7509)

    [See EVPN Type 5 Route with VXLAN Encapsulation for EVPN-VXLAN and ip-prefix-routes.]

  • Support for asynchronous notification in E-LAN and E-Tree over EVPN-MPLS networks (ACX7100-32C, ACX7100-48L, ACX7024, ACX7024X, ACX7332, ACX7348, and ACX7509)

    [See asynchronous-notification.]

  • Support for EVPN E-LAN and EVPN E-Tree over BGP-LU PIC Edge (ACX7100-32C, ACX7100-48L, ACX7024, ACX7024X, ACX7332, ACX7348, and ACX7509)

    [See BGP PIC for Layer 3 VPNs and labeled-unicast.]

  • Support for FEC 128 and FEC 129 VPLS with source packet routing (ACX7332)

    [See site (VPLS Multihoming for FEC 128), site (VPLS Multihoming for FEC 129), Example: Configuring VPLS Multihoming (FEC 129), and Understanding Source Packet Routing in Networking (SPRING).]

  • Support for L2PT for VPLS (ACX7024, ACX7024X, ACX7100-32C, ACX7100-48L, ACX7332, ACX7348, and ACX7509)

    [See Configuring L2PT for VPLS.]

  • Support for network-isolation in E-LAN and E-Tree over EVPN-MPLS networks (ACX7100-32C, ACX7100-48L, ACX7024, ACX7024X, ACX7332, ACX7348, and ACX7509)

    [See network-isolation and network-isolation-profile.]

  • Support for no-local-switching in E-LAN over EVPN-MPLS networks (ACX7100-32C, ACX7100-48L, ACX7024, ACX7024X, ACX7332, ACX7348, and ACX7509)

    [See no-local-switching and core-facing.]

  • Support for VPLS ping and disabling MAC learning (ACX7100-32C, ACX7100-48L, ACX7024, ACX7024X, ACX7332, ACX7348, and ACX7509). You can now disable MAC learning and use VPLS ping to send packets to a particular destination.

    • To send ping packets to a destination for a specific VPLS instance, use the ping vpls instance command. [See ping vpls instance.]

    • To disable MAC learning for a particular VLAN, include the no-mac-learning statement at the [edit routing-instances routing-instance-name vlans vlan-name switch-options] hierarchy level. [See no-mac-learning.]

    • To disable MAC learning globally on a device, include the global-no-mac-learning at the [edit protocols l2-learning] hierarchy level. [See global-no-mac-learning.]

  • QSFP-100G coherent ZR optics performance monitoring (ACX7509). Monitor the performance of QSFP-100G coherent ZR optics and receive threshold-crossing alert (TCA) information to efficiently manage the optical transport link. Accumulate performance metrics into 15-minute and 1-day interval bins. Use the show interfaces transport pm command to view current and historical performance data.

    [See optics-options, and show interfaces transport pm.]

  • Support for internet-options commands (ACX7100-32C, ACX7100-48L, ACX7509, PTX10001-36MR|PTX10003, PTX10004, PTX10008, PTX10016. QFX5130-32CD, QFX5130-48C, QFX5130-48CM, QFX5700, and QFX5220). We have added additional traffic management command options to the [set system internet-options] hierarchy:

    • no-tcp-reset drop-all-tcp

    • no-tcp-reset drop-tcp-with-syn-only

    • ipv6-path-mtu-discovery-timeout minutes

    [See internet-options.]

  • Support for IPv6 agent-ID in sFlow configuration (ACX7024, ACX7024X, ACX7100-32C, ACX7100-48L, ACX7332, ACX7348, and ACX7509). You can configure the IPv6 agent-ID statement at the [edit protocols sflow] hierarchy level. With this enhancement, you can utilize sFlow with improved agent identification, facilitating better network traffic monitoring and analysis.

    [See sflow and show sflow.]

  • Specify the install package name as a URL in the request system software add command (ACX Series, PTX Series, and QFX Series)

    [See request system software add (Junos OS Evolved).]

  • Support for file-system encryption with Trusted Platform Module (TPM 2.0) (ACX7100-32C, ACX7100-48L, and PTX10002-36QDD)

    [See Encryption with Trusted Platform Module.]

  • Support for IRB in L3VPN VRF over SRv6 (ACX7100-32C, ACX7100-48L, ACX7024, ACX7024X, ACX7332, ACX7348, and ACX7509)

    [See Layer 3 VPN Services over the SRv6 Core.]

  • Supported transceivers, optical interfaces, and DAC cables (ACX Series). Select your product in the Hardware Compatibility Tool to view supported transceivers, optical interfaces, and direct attach copper (DAC) cables for your platform or interface module. We update the HCT and provide the first supported release information when the optical transceiver becomes available.

  • Support for packets-per-second (pps) policer (ACX7100-32C, ACX7100-48L, ACX7332, ACX7348, ACX7509, ACX7024, and ACX7024X)

    [See Packets-Per-Second (pps)-Based Policer Overview.]