Hardware
-
New MX10004 Universal Routing Platform (MX Series)—
In Junos OS Release 22.3R1, we introduce the MX10004 router as the most compact, high-density, and power-efficient modular device in the MX10000 line of routers. This next-generation edge, metro aggregation, and peering platform is only 7 U in height and is designed for space-constrained facilities. Like the larger MX10008 router, the MX10004 supports Juniper’s 400GbE architecture with inline Media Access Control Security (MACsec) on all ports for point-to-point security on Ethernet links.
To install the MX10004 router hardware and perform initial software configuration, routine maintenance, and troubleshooting, see MX10004 Universal Routing Platform Hardware Guide.
Table 1: Feature Support on MX10K-LC9600 Feature Description Chassis
- Support for VM host.
[See VMHost Overview (Junos OS).]
-
-
Support for new ZF-based switch fabric 2 (SF2)
-
Fabric support for line cards LC2101, LC480, and LC9600
Fabric management and Doon RCB support for MX10004 with line cards and Junos OS version .
- SF2 Platform Support for MX10004 that includes:
- Platform support for switch fabric with 1 ZF ASIC (SF2) and four-slots.
-
FRU management support for:
-
Two fan trays and two fan tray controllers.
-
Three SFBs.
-
LED and alarms for FRU.
-
- Three 5.5 KW PSM slots with AC or DC PSUs.
- FPC and PSM power management with support for temperatures from 25C to 40C.
-
-
-
Platform Resiliency Support for MX10004, that includes:
-
Resiliency for FRUs and new SF2 (switch fabric)
-
Support for NSR, routing engine switchover of SF2 (GRES)
[See MX10004 Hardware Guide and Fabric-Plane-Management-on-MX10004-Devices] .]
-
-
Class of service (CoS)
-
Support for forwarding CoS.
Distributed denial-of-service
-
Support for distributed denial-of-service (DDoS) protection .
[See Control Plane Distributed Denial-of-Service (DDoS) Protection Overview.]
Firewall filter
-
Firewall filter processing.
Hardware
-
New JNP10004-SF2 Switch Fabric Board (SFB). The ZF ASIC-based JNP10004-SF2 SFB makes up the MX10004 switching plane to provide fabric interconnect for the custom silicon line cards with 480-Gbps, 2.4-Tbps, and 9.6-Tbps throughput. The MX10004 supports six SFBs. With all six SFBs and all four MX10K-LC9600 line cards installed, the MX10004 has a net switching capacity of 38.4 Tbps. Each SFB has four connectors that correspond to a matching connector on one of the four line cards. Depending on the type of line card used, you can have either 5+1 fabric card redundancy or no redundancy.
-
SF2 platform support, including:
-
Platform support for switch fabric with 1 ZF ASIC (SF2) and four slots
-
FRU management support for:
-
Two fan trays, two fan tray controllers
-
Three SF2 SFBs (JNP10004K-SF2)
-
LED and alarms for FRU
-
-
Slots for three 5.5-kW PSMs with AC or DC PSUs
-
FPC and PSM power management with support for temperatures from 25° C through 40° C
-
-
Support for SF2 (JNP10004-SF2) resiliency.
Interfaces
-
Interface support. The MX10004 supports the MX10K-LC2101, MX10K-LC480, and MX10K-LC9600 line cards with throughput of 2.4 Tbps, 480 Gbps, and 9.6 Tbps, respectively.
You can configure the port speed at the [
edit chassis
] hierarchy level.[See Port Speed.]
-
Support for load balancing.
Static tunnel
-
Support for static tunnel.
[See Tunnel Services Overview.]
Junos Broadband Edge (BBE)
-
Support for Junos BBE.
Junos telemetry interface
-
Telemetry support for fabric sensors.
[See Guidelines for gRPC and gNMI Sensors (Junos Telemetry Interface).]
-
Support for chassis management error (cmerror) telemetry statistics.
[See Guidelines for gRPC and gNMI Sensors (Junos Telemetry Interface) and Telemetry Sensor Explorer.]
-
Support for platform sensor optics.
[See Telemetry Sensor Explorer.]
-
Support for platform and alarm sensors.
[See Telemetry Sensor Explorer.]
-
Support for physical, logical, and Ethernet interface statistics.
[See Telemetry Sensor Explorer.}
-
Sensor support for transceiver diagnostics based on the OpenConfig data model openconfig-platform-transceiver.yang, version 0.5.0.
[See Telemetry Sensor Explorer.]
Layer 2 features
-
Layer 2 features support.
[See Configuring Q-in-Q Tunneling and VLAN Q-in-Q Tunneling and VLAN Translation, Understanding Layer 2 Bridge Domains, Understanding Layer 2 Learning and Forwarding, Introduction to OAM Connectivity Fault Management (CFM), Enabling MAC Accounting for a Router or a Bridge Domain, LLDP Overview, Configuring Aggregated Ethernet LACP, and EVPN Overview.]
Layer 3 features
-
Forwarding Layer 3 routing features support.
[See Understanding OSPF Configurations, BGP Overview, z, and Bidirectional Forwarding Detection (BFD).]
-
Layer 3 features support.
[See MPLS Overview, Multicast Overview, and Understanding Next-Generation MVPN Control Plane.]
Network management and monitoring
-
Support for port mirroring.
[See Configuring Port Mirroring on M, T MX, ACX, and PTX Series Routers.]
Timing synchronization
-
Support for timing synchronization and link aggregation group (LAG).
See Time Management and Synchronization Overview and Configuring Multichassis Link Aggregation on MX Series Routers.]
-
Support for PTP G8275.1 profile.
Services applications
-
Support for inline services, including:
- Inline NAT—NAT44 and NPTv6
- Inline softwires—MAP-E and 6rd
- Inline active flow monitoring
- Inline monitoring services
- Inline video monitoring
- FlowTapLite
[See Inline NAT, Configuring Mapping of Address and Port with Encapsulation (MAP-E), Configuring Inline 6rd, Understand Inline Active Flow Monitoring, Inline Monitoring Services Configuration, Understanding Inline Video Monitoring, and Configuring FlowTapLite.]
Subscriber management and services
LC2101 and LC480 line cards support Multi-Access User Plane/Wireless CUPS.
- Support for VM host.