show system firmware
Syntax
show system firmware <compatibility>
Description
(J Series routers, MX240, MX480, MX960, MX2010, and MX2020 routers, PTX3000 and PTX5000 routers, EX8200 switches, QFX10008 switches only) Display firmware information.
Options
compatibility | (Optional) Display firmware compatibility information. |
Required Privilege Level
view
Output Fields
Table 1 lists the output fields
for the show system firmware
command. Output fields are
listed in the approximate order in which they appear.
Field Name |
Field Description |
---|---|
Part |
Physical part on the router or switch affected by the firmware. |
Type |
Type of firmware on the router or switch. |
Tag |
Location of the firmware on the interface. |
Current version |
Firmware version on the affected router or switch parts. |
Available version |
New versions of firmware for upgrading or downgrading. |
Status |
Firmware condition on the router or switch. |
Action |
Whether you can upgrade or downgrade,
or if no action is available (none).This field is displayed
only if the |
Sample Output
- show system firmware
- show system firmware compatibility
- show system firmware (QFX10008 Switch)
- show system firmware (MX Series Routers with MIC3-100G-DWDM)
- show system firmware (MX Series Routers with MIC3-100G-DWDM)
- show system firmware (PTX10003-80C Routers)
show system firmware
user@host> show system firmware Part Type Tag Current Available Status version version FPC 0 ROM Monitor 0 0 6.4.10 OK Routing Engine 0 RE BIOS 0 0 OK
show system firmware compatibility
user@host> show system firmware compatibility Part Type Tag Current Available Action version version FPC 0 ROM Monitor 0 0 6.4.10 None Routing Engine 0 RE BIOS 0 0 None
show system firmware (QFX10008 Switch)
user@host>show system firmware Part Type Status CB 0 FPGA OK FPC 0 U-Boot OK CTRL FPGA PROGRAMMING PORT FPGA PROGRAMMING FPM FPGA OK FTC 0 FPGA OK FTC 1 FPGA OK SIB 0 FPGA OK SIB 1 FPGA OK SIB 2 FPGA OK SIB 3 FPGA OK SIB 4 FPGA OK SIB 5 FPGA OK
show system firmware (MX Series Routers with MIC3-100G-DWDM)
user@host> show system firmware Part Type Tag Current Available Status version version FPC 0 ROM Monitor 0 0 10.4.1 OK FPC 1 ROM Monitor 0 0 10.4.1 OK FPC 2 ROM Monitor 0 0 10.4.1 OK PIC 0 CMIC LTC 2/0 1 .0 1.0 OK FPC 3 ROM Monitor 0 0 10.4.1 OK FPC 4 ROM Monitor 0 0 13.3.1 OK FPC 4 MPCS(0) 2 0.24.0 OK Routing Engine 0 RE BIOS 0 1.18 OK Routing Engine 1 0 1.18 OK
The current firmware version .0
does not match the available version 1.0
. This output displays the status before the firmware upgrade.
show system firmware (MX Series Routers with MIC3-100G-DWDM)
user@host> show system firmware Part Type Tag Current Available Status version version FPC 0 ROM Monitor 0 0 10.4.1 OK FPC 1 ROM Monitor 0 0 10.4.1 OK FPC 2 ROM Monitor 0 0 10.4.1 OK PIC 0 CMIC LTC 2/0 1 1.0 1.0 UPGRADED SUCCESSFULLY FPC 3 ROM Monitor 0 0 10.4.1 OK FPC 4 ROM Monitor 0 0 13.3.1 OK FPC 4 MPCS(0) 2 0.24.0 OK Routing Engine 0 RE BIOS 0 1.18 OK Routing Engine 1 0 1.18 OK
The current firmware version 1.0
matches the available version 1.0
. This output displays the status after the firmware upgrade.
show system firmware (PTX10003-80C Routers)
user@router> show system firmware Part Type Tag Current Available Status version version CB 0 MBAM FPGA 0 181011.09 181011.09 OK FPC 0 PBAM FPGA 0 181011.09 OK FPC 0 QBAM FPGA 1 181011.0B OK FPC 1 PBAM FPGA 0 181011.09 181011.09 OK FPC 1 QBAM FPGA 1 181011.0B 181011.0B OK PSM 0 Psm MCU AC 0 0116.0036 0209.9205 OK PSM 1 Psm MCU AC 0 255255.255255 0209.9205 OK RE 0 UBAM FPGA 0 181023.0F 181023.0F OK RE 0 i40e 1 6.01 6.01 OK RE 0 SSD Primary 2 SBR12050 SBR12050 OK RE 0 SSD Secondary 3 SBR12050 SBR12050 OK RE 0 BIOS ROM 4 14.1 15.01 OK
Starting in Junos OS Evolved Release 19.1R1, on PTX10003-80C
and PTX10003-160C
routers, the show system firmware
command displays information
based on the accessibility of the device and not the FRU state. The
firmware information is cached in the FRU online state if the device
is accessible. This cached information is displayed even when the
FRU is in error or offline condition.
Release Information
Command introduced in Junos OS Release 7.4.