Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Status Monitor for Virtual Chassis

This monitor provides status information, including power supply and fan information, for a Virtual Chassis. It is on the Equipment tab in Monitor mode.

The Summary view shows key status fields in a table format. Power supply and fan data is represented as small bar chart entries in the table. The Details view also shows the same status information, but expands the power supply and fan information. Table 1 displays these fields and their location in the monitor.

Table 1: Virtual Chassis Status Monitor Fields

Field

Function

Location

Serial Number

Indicates the hardware serial number of the primary member.

SummaryDetailed

IP Address

Indicates the IP address of the primary member.

SummaryDetailed

Uptime

Indicates the amount of time since the last boot of the system in days, hours, minutes, and seconds.

SummaryDetailed

Status

Indicates whether the Virtual Chassis is up or down.

SummaryDetailed

Used MAC Addresses

Indicates the number of MAC addresses in use on the Virtual Chassis.

SummaryDetailed

Used VLANs

Indicates the VLAN memberships for the Virtual Chassis.

SummaryDetailed

Last Configured Time

Indicates the date and time since the Virtual Chassis was last configured.

SummaryDetailed

Temperature Range (°C)

Indicates the temperature of the coolest and hottest devices in the Virtual Chassis (in degrees Celsius).

SummaryDetailed

Junos Version

Indicates the version and release level of Junos OS running on the device.

SummaryDetailed

Power Supply Status

Indicates the number of power supplies that are detected as absent or present in the bay. The graphic bar and total count for missing and present power supplies is shown as OK, Check, or Failed.

Summary

Power Supply Status

In the Power Supply and Fan Status table, there are separate table entries for each power supply state with the totals for that state.

Detailed

Fan Status

Indicates the number of cooling fans that are detected as absent or present in the bay. The graphic bar and total count for missing and present fans is shown as OK, Check, or Failed.

Summary

Fan Status

In the Power Supply and Fan Status table, there are separate table entries for each power supply state with the totals for that state.

Detailed

Related Documentation