Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?




Hierarchy Level


Configure the parameters for the RFC 2544-based benchmarking test to examine and analyze the performance characteristics of a network interconnecting device. You must configure a test profile, which specifies the type of test and the manner in which it must be performed, and associate the test profile with a test name. The test name that you configure contains details, such as the address family and the test mode, for the test. You can associate the same test profile with multiple test names.

The remaining statements are explained separately. Search for a statement in CLI Explorer or click a linked statement in the Syntax section for details.



Required Privilege Level

system—To view this statement in the configuration.

system-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Evolved Release 21.1R1.

Support for the destination-mac-address, direction, disable-signature-check, in-service, ip-swap, reflect-etype, reflect-mode, service-type, source-mac-address, and udp-tcp-port-swap configuration statements introduced in Junos OS Evolved 22.4R1.

Support for bandwidth, dscp-code-points, halt-on-prefix-down, mode initiate-and-terminate, packet-size, step-percent, test-iterator-duration, test-profile, and test-type configuration statements introduced in Junos OS Evolved Release 23.4R1.