service-type (RFC 2544 Benchmarking Tests)
Syntax
service-type (elan | eline) ;
Hierarchy Level
[edit services rpm rfc2544-benchmarkingtests test-name test-name]
Description
Configure the service under test. Possible values are elan and
eline. This statement is applicable only for the
bridge family, the ethernet-switching family,
or when the mode is configured as reflect. When the service type is
elan, MAC addresses are swapped by default on the reflected
frames. The no-mac-swap option is not supported for this service
type. When the service type is eline, MAC addresses are not swapped
by default in the reflected frames. Use the mac-swap option to swap
the addresses.
When you configure Layer 2 reflection, you can specify the service type under test as
eline if you want to simulate an E-Line service using
bridge encapsulation.
Options
| elan | Specify the ELAN service type. |
| eline | Specify the E-Line service type. |
Required Privilege Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 12.3X53.
Statement introduced in Junos OS Evolved Release 22.4R1.