reflect-etype
Syntax
reflect-etype ethertype-value;
Junos OS Hierarchy Level
[edit services rpm rfc2544-benchmarkingtests test-name test-name]
Description
Specify the EtherType to be used for reflection of the test frames. EtherType is a two-octet field in an Ethernet frame that defines the protocol in the frame payload. This statement is valid only if you configure the test mode to be a reflector. If you do not configure this statement, all EtherTypes are reflected.
Options
ethertype-value |
Identifier for the EtherType. The EtherType value appears in the Ethernet type field of the packet. It specifies the protocol being transported in the Ethernet frame. For instance, the EtherType for IPv4 is 0x0800. So, if you specify the value as 2048, IPv4 packets are reflected.
|
Required Privilege Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 12.3X53.
Statement introduced in Junos OS Evolved Release 22.4R1.