Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

MX2020 AC Power Requirements

To allow for future growth so that you can operate the router in any hardware configuration without upgrading the power infrastructure, we recommend that you provision 2800 W for each AC power distribution module (PDM) (three-phase or single-phase).

If you do not plan to provision 2800 W for each AC power supply module (PSM), use the information in Table 1 and Table 2 to calculate power consumption for various hardware configurations, input current from a different source voltage, and thermal output.

Table 3 lists the power requirements for various hardware components when the router is operating under typical voltage conditions.

Note:

Unlike all the other MPCs, MPC6E, MPC8E, and MPC9E do not require an adapter card (ADC) to house the MPC in the MX2020 router.

Table 1: Base AC Power Requirements

Component

Power Requirement (Watts)

Base system, (not including MPCs, ADCs, and MICs) includes seven SFBs, one host subsystem (Control Board and Routing Engine [CB-RE], four fan trays, a craft interface, eight PSMs, and two PDMs.

9,439 W (based on 55° C operation)

2,142 W (Typical)
Table 2: Typical AC Power Requirements for MX2020 Router

Component

Model Number

Power Requirement (Watts) with 91% Efficiency

Base chassis

CHAS-BP-MX2020

 

Fan trays, upper

MX2000-FANTRAY

200W * 2 = 400 W

Fan trays, lower

MX2000-FANTRAY

200 W * 2 = 400 W

MPC

MPC-3D-16XGE-SFPP

440 W * 20 = 8800 W

ADC

ADC

150 W * 20 = 3000 W

CB-RE

RE-MX2000-1800X4

150 W

REMX2K-X8-64G

400 W

Three-phase delta AC PDM (2 per system) @ 50 A feed (input 1) and 25 A feed (input 2)

MX2000-PDM-AC-DELTA

2800 W

Three-phase wye AC PDM @ 30 A feed (input 1) and 15 A (input 2)

MX2000-PDM-AC-WYE

2800 W

Nine-feed single-phase AC PDM

MX2K-PDM-AC-1PH

2800 W

Seven-feed single-phase AC PDM

MX2K-PDM-OP-AC

2800 W

SFB—slots 0 through 7

MX2000-SFB

200 W * 8 = 1600 W

If you do not plan to provision as recommended above, you can use the information in Table 3 to calculate the power consumption for your hardware configuration.

Table 3: MX2020 FRU AC Power Requirements

Component

Model Number

Maximum Power Requirement
Switch Fabric Boards (SFBs)

SFB

MX2000-SFB

200 W (Typical)

220 W at 55° C

220 W at 40° C

220 W at 25° C

SFB2

MX2000-SFB2-S

250 W (Typical)

295 W at 55° C

280 W at 40° C

270 W at 25° C
Fan Trays

Fan trays, upper

MX2000-FANTRAY

200 W (Typical)

1700 W at 55° C

1150 W at 40° C

350 W at 25° C

Fan trays, lower

200 W (Typical)

1700 W at 55° C

1150 W at 40° C

350 W at 25° C
Adapter Cards

ADC

MX2000-LC-ADAPTER

150 W
Control Board and Routing Engine

CB-RE

RE-MX2000-1800X4

150 W (Typical)

250 W at 55° C

250 W at 40° C

250 W at 25° C

REMX2K-X8-64G

400 W
MPCs

MPC-3D-16XGE-SFPP

MPC-3D-16XGE-SFPP

440 W at 55° C ambient

MPC1

MX-MPC1-3D

MX-MPC1E-3D

165 W

With MICs and optics:

239 W at 55° C

227 W at 40° C

219 W at 25° C

MPC1 Q

MX-MPC1-3D-Q

MX-MPC1E-3D-Q

175 W

With MICs and optics:

249 W at 55° C

237 W at 40° C

228 W at 25° C

MPC2

MX-MPC2-3D

MX-MPC2E-3D

274 W

With MICs and optics:

348 W at 55° C

329 W at 40° C

315 W at 25° C

MPC2 Q

MPC2 EQ

MX-MPC2-3D-Q

MX-MPC2-3D-EQ

MX-MPC2E-3D-Q

MX-MPC2E-3D-EQ

294 W

With MICs and optics:

368 W at 55° C

347 W at 40° C

333 W at 25° C

MPC2E P

MX-MPC2E-3D-P

294 W

With MICs and optics:

368 W at 55° C

347 W at 40° C

333 W at 25° C

MPC3E

MX-MPC3E-3D

440 W

With MICs and optics:

500 W at 55° C, two 40 W MICs

485 W at 40° C, two CFP MICs with LR4 optics

473 W at 25° C, two CFP MICs with LR4 optics

32x10GE MPC4E

MPC4E-3D-32XGE-SFPP

610 W

With optics:

607 W at 55° C, with SFPP ZR optics

590 W at 40° C, with SFPP ZR optics

585 W at 25° C, with SFPP ZR optics

2x100GE + 8x10GE MPC4E

MPC4E-3D-2CGE-8XGE

610 W

With optics:

607 W at 55° C, with SFPP ZR and CFP LR4 optics

590 W at 40° C, with SFPP ZR and CFP LR4 optics

585 W at 25° C, with SFPP ZR and CFP LR4 optics

6x40GE + 24x10GE MPC5E

6x40GE + 24x10GE MPC5EQ

MPC5E-40G10G

MPC5EQ-40G10G

 With optics:

607 W at 55° C

541 W at 40° C

511 W at 25° C

2x100GE + 4x10GE MPC5E

2x100GE + 4x10GE MPC5EQ

MPC5E-100G10G

MPC5EQ-100G10G

 With optics:

607 W at 55° C

541 W at 40° C

511 W at 25° C

MPC6E

MX2K-MPC6E

1088 W with MICs and optics

MPC7E-MRATE

MPC7E-MRATE

400 W (Typical)

545 W at 55° C

465 W at 40° C

440 W at 25° C

MPC8E

(without MICs)

MX2K-MPC8E

688 W (Typical)

805 W at 55° C

720 W at 40° C

690 W at 25° C

MPC9E

(without MICs)

MX2K-MPC9E

838 W (Typical)

1018 W at 55° C

870 W at 40° C

840 W at 25° C
MICs

ATM MIC with SFP

MIC-3D-8OC3-2OC12-ATM

35 W

Gigabit Ethernet MIC with SFP

MIC-3D-20-GE-SFP

37 W

10-Gigabit Ethernet MIC with XFP

2-Port: MIC-3D-2XGE-XFP

4-Port: MIC-3D-4XGE-XFP

2-Port: 29 W

4-Port: 37 W

10-Gigabit Ethernet MIC with SFP+

MIC6-10G

74 W

With optics:

53 W at 55° C, 40° C and 25° C with 10G BASE-SR and 10G BASE-LR optics

66 W at 55° C, 40° C and 25° C with 10G BASE-ER optics

74 W at 55° C, 40° C and 25° C with 10G BASE-ZR optics

10-Gigabit Ethernet DWDM OTN MIC

MIC6-10G-OTN

84 W

With optics:

63 W at 55° C with 10G BASE-LR OTN optics

63 W at 40° C with 10G BASE-LR OTN optics

63 W at 25° C with 10G BASE-LR OTN optics

40-Gigabit Ethernet MIC with QSFPP

MIC3-3D-2X40GE-QSFPP

18 W

100-Gigabit Ethernet MIC with CFP

MIC3-3D-1X100GE-CFP

40 W

100-Gigabit Ethernet MIC with CXP

MIC3-3D-1X100GE-CXP

20 W

100-Gigabit Ethernet MIC with CFP2

MIC6-100G-CFP2

104 W

With optics:

94 W at 55° C with 100G BASE-LR4 OTN optics

86 W at 40° C with 100G BASE-LR4 OTN optics

74 W at 25° C with 100G BASE-LR4 OTN optics

100-Gigabit Ethernet MIC with CXP

MIC6-100G-CXP

57 W

49 W at 55° C with CXP SR10 optics

49 W at 40° C with CXP SR10 optics

49 W at 25° C with CXP SR10 optics

100-Gigabit DWDM OTN MIC with CFP2

MIC3-100G-DWDM

 With optics:

91 W at 55° C

83 W at 25° C

SONET/SDH OC3/STM1 Multi-Rate MIC

4-Port: MIC-3D-4OC3OC12-1OC48

8-Port: MIC-3D-8OC3OC12-4OC48

4-Port:

24 W at 55° C

22.75 W at 40° C

21.5 W at 25° C

8-Port:

29 W at 55° C

27.75 W at 40° C

26.5 W at 25° C

OC192/STM64 MIC with XFP

MIC-3D-1OC192-XFP

41 W at 55° C

38.5 W at 40° C

36 W at 25° C

Channelized SONET/SDH OC3/STM1 Multi-Rate MIC

4-Port: MIC-3D-4CHOC3-2CHOC12

8-Port: MIC-3D-8CHOC3-4CHOC12

4-Port:

41 W at 55° C

40 W at 40° C

39 W at 25° C

8-Port:

52 W at 55° C

50.5 W at 40° C

49 W at 25° C

Channelized OC48/STM16 MIC with SFP

MIC-3D-1CHOC48

56.5 W at 55° C

54.5 W at 40° C

53 W at 25° C

Tri-Rate MIC

MIC-3D-40GE-TX

41 W

MIC MRATE

MIC-MRATE

  • When installed into MPC8E: 1.250 A @ 48 V (60 W)

  • When installed into MPC9E: 1.771 A @ 48 V (85 W)

DS3/E3 MIC

MIC-3D-8DS3-E3

MIC-3D-8CHDS3-E3-B

36 W at 55° C

35 W at 40° C

34 W at 25° C

Channelized OC3/STM1 (Multi-Rate) Circuit Emulation MIC with SFP

MIC-3D-4COC3-1COC12-CE

33.96 W

Related Documentation