Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

2x100GE + 4x10GE MPC5E

Line card module labeled MPC5E-100G10G from Juniper Networks, supports 100Gbps and 10Gbps Ethernet connections.

Software release

  • Junos OS Release 13.3R3 and later

Description

  • Fixed-configuration MPC with two 100-Gigabit Ethernet ports and four 10-Gigabit Ethernet ports

  • Weight: 21 lb (9.52 kg)

  • Model number: MPC5E-100G10G

  • Name in the CLI: MPC5E 3D 2CGE+4XGE

Hardware features

  • Line-rate throughput of up to 240 Gbps

  • Supports up to 32,000 queues per-slot

  • LAN-PHY mode at 10.3125 Gbps on a per-port basis

  • WAN-PHY mode at 9.95328 Gbps on a per-port basis

  • Supports maximum transmission unit (MTU) size of 9,192 bytes for host bound packets. For Junos OS 16.1R1 and later releases, the MTU size supported is 9,500 bytes.

  • The ports are labeled as:

    • 10-Gigabit Ethernet ports: 0/0, 0/1, 2/0, and 2/1

    • 100-Gigabit Ethernet ports: 1/0 and 3/0

  • The MPC5E supports the enhanced Switch Control Board (MX-SCBE) and MX-SCBE2 on MX240, MX480, and MX960 routers. The MPC5E does not support the legacy SCB (MX-SCB). The MPC5E supports the Switch Fabric Board (SFB) on MX2010 and MX2020 routers.

  • MPC5E does not interoperate with the existing DPCs, except the Multiservices DPC (MS-DPC).

Note:

On the MX960 router, all the MPC slots work in a chassis temperature of up to 40°C (104°F), at an altitude of up to 6000 feet. However, when the chassis temperature exceeds 40°C (104°F),

  • the slot 11 does not work with MPC3E-3D-NG, MPC3E-3D-NG-Q, MPC4E, and MPC5E.

  • the slot 0 does not work with MPC4E and MPC5E.

Software features
Note:

On MX240, MX480, and MX960 routers, MPC5E powers on only if the network-services mode on the router is configured to either enhanced-ip or enhanced-ethernet. On MX2010 and MX2020 routers, only enhanced-ip is supported.

Cables and connectors
Tip:

You can use the Hardware Compatibility Tool to find information about the pluggable transceivers supported on your Juniper Networks device.

The list of supported transceivers for the MX Series is located at https://pathfinder.juniper.net/hct/category/#catKey=100001&modelType;=All&pf;=MX+Series.

Note:

  • CFP2-100G-ER4-D is not NEBS compliant on the MX960 router in FPC slot 0 or FPC slot 11.

  • CFP2-DCO-T-WDM-1 is not NEBS compliant on the MX960 router or the MX2020 router in FPC slot 0 or FPC slot 11. Slots 0 and 11 can only work with an ambient temperature of up to 40° C.

Power requirements

  • Typical: 10.52 A @ 48 V (505 W)

  • At different temperatures:

    55° C: 607 W

    40° C: 541 W

    25° C: 511 W

LEDs

OK/FAIL LED, one bicolor:

  • Steady green—MPC is functioning normally.

  • Blinking green—MPC is transitioning online or offline.

  • Red—MPC has failed.

10-Gigabit Ethernet LINK LED, one bicolor per port:

  • Green—Link is up.

  • Yellow—Link is disabled.

  • Off—Link is down or disabled.

100-Gigabit Ethernet LINK LED, one bicolor per port:

  • Green—Link is up.

  • Yellow—Link is disabled.

  • Off—Link is down.

Related Documentation