Protocols and Applications Supported on the MPC4E for MX Series Routers
Table 1 contains the first Junos OS Release support for protocols and applications on the MPC4E. The protocols and applications support feature parity with Junos OS Release 12.2. A dash indicates that the protocol or application is not supported.
Protocol or Application |
First Supported Junos OS Release |
|---|---|
|
Bidirectional Forwarding Detection protocol (BFD) |
12.3R2 |
|
Border Gateway Protocol (BGP) |
12.3R2 |
|
Bridge protocol data units (BPDUs) |
12.3R2 |
|
Class of service (CoS):
|
12.3R2 |
|
Class of service (CoS) per port:
|
12.3R2 Note:
Fine-grained queuing and input queuing are not supported. |
|
Class of service (CoS) per virtual LAN (VLAN):
|
12.3R2 |
|
Connectivity Fault Management (CFM) protocols and features (IEEE 802.1ag):
|
12.3R2 |
|
12.3R2 |
|
|
Distributed Periodic Packet Management Process (PPMP) For more information, see Periodic Packet Management. |
12.3R2 |
|
Distance Vector Multicast Routing Protocol (DVMRP) Tunnels—access side and server side |
12.3R2 |
|
Ethernet Alarm Indication Signal (ETH-AIS) Function Overview |
12.3R2 |
|
Ethernet Ring Protection Switching with multiple G.8032 instances See Understanding Ethernet Ring Protection Switching for more information. |
12.3R2 |
|
Firewall filters and policers:
|
12.3R2 |
|
Flexible Ethernet encapsulation |
12.3R2 |
|
Graceful routing engine switchover (GRES) |
12.3R2 |
|
Configuring Generic Routing Encapsulation Tunneling—access side and server side |
12.3R2 |
|
IGMPv3 support with snooping disabled |
12.3R2 |
|
Ingress and egress hierarchical class-of-service (CoS) shaping and hierarchical-scheduler:
|
– |
|
12.3R2 |
|
|
12.3R2 |
|
|
Integrated Routing and Bridging (IRB) |
12.3R2 |
|
13.3 |
|
|
Interoperability with MX Series Flexible PIC Concentrators (MX-FPC) |
12.3R2 |
|
Interoperability with MPCs and existing DPCs |
12.3R2 |
|
Interoperability with Juniper Networks 100-Gigabit Ethernet PIC |
12.3R2 |
|
Interoperability with MX Series Application Services Modular Line Card (AS-MLC) |
12.3R2 |
|
IPv4 |
12.3R2 |
|
IPv4 multicast |
12.3R2 |
|
IPv6 |
12.3R2 |
|
12.3R2 |
|
|
IPv6 multicast |
12.3R2 |
|
12.3R2 |
|
|
Immediate System-to-Intermediate System (IS-IS) |
12.3R2 |
|
ITU-T Y.1731 timestamping support (MX Series routers) |
12.3R2 |
|
Flow monitoring and services:
|
12.3R2 |
|
Labeled-switched-paths (LSPs) including accounting, policers, and filtering |
12.3R2 |
|
12.3R2 |
|
| Subscriber Management | - |
|
Layer 2 features:
|
Release
|
|
Layer 3 Features:
|
Release
|
|
Link aggregation (IEEE 802.3ad) |
12.3R2 |
|
Link Aggregation Control Protocol (LACP) |
12.3R2 |
|
– |
|
|
Local loopback |
12.3R2 |
|
MAC learning, policing, accounting, and filtering |
12.3R2 |
|
Mobile IP |
– |
|
Multiservices DPC (MS-DPC):
|
13.2R1 |
|
Multi-chassis Link Aggregation (MC-LAG) |
13.3R1 |
|
Multiple Tag Protocol Identifiers (TPIDs) |
12.3R2 |
|
Multiprotocol Label Switching (MPLS) :
|
12.3R2 |
|
mvrp |
– |
|
– |
|
|
Nonstop Active Routing (NSR) |
12.3R2 |
|
Open Shortest Path First (OSPF) |
12.3R2 |
|
Packet mirroring |
12.3R2 |
|
Precision Time Protocol (PTP) (IEEE 1588) |
15.1R1 |
|
IEEE 802.1ah provider backbone bridges (PBB) |
– |
|
Periodic Packet Management Process (PPMP) and Distributed PPMP |
12.3R2 |
|
Push a tag on Ethernet VPLS and Ethernet CCC tag encapsulations |
– |
|
Remote Defect Indication (RDI) |
12.3R2 |
|
12.3R2 |
|
|
Routing Information Protocol (RIP) |
12.3R2 |
|
SNMP |
12.3R2 |
|
Spanning Tree Protocols:
|
12.3R2 |
|
Synchronous Ethernet (SyncE) |
12.3 with SCBE and later |
|
Two-Way Active Measurement Protocol (TWAMP) |
13.2 |
|
Tunnel services
|
12.3R2 |
|
Type, Length, and Value (TLVs) support (IEEE 802.1ag) |
– |
|
Unnumbered Ethernet Interface |
12.3R2 |
|
12.3R2 |
|
13.2R1 (12.3R4 TRD) |
|
Virtual Private LAN service (VPLS):
|
12.3R2 |
|
Virtual private network (VPN):
|
12.3R2 |
|
Virtual Router Redundancy Protocol (VRRP) for IPv4
|
12.3R2 |
|
VPLS packet flooding to the right set of interfaces across mesh groups |
12.3R2 |
|
WAN-PHY mode |
12.3R2 |