Known Issues

This section lists known issues for Network Activator Release 1.0.

• When you add a new regional server after the initial setup process, the new regional server does not detect the image file.

  Workaround: Use the following procedure to add a regional server after initial setup:

  1. Delete the existing image in Network Activator on the central server.
  2. Add the new regional server.
  3. Upload the image to Network Activator on the central server. CXU-803
• When you specify information about a device in Network Activator on the central server, the application creates the following default objects:
  • default-domain
  • default-project
  • default-device

  Caution: Do not delete these objects. Doing so may prevent the remote device from obtaining information for initial provisioning.

  CXU-836

• You cannot delete a regional server that you created for Network Activator using the config_box.sh regional command. CXU-838
• Network Activator does not support HTTP links for URLs that Network Activator APIs return in response to a REST call. A firewall rule for the VMs on the host servers prevents incoming traffic on port 80.

  Workaround: When you make a new REST call, use the prefix https rather than http. The REST call then returns URLs with the prefix https. CXU-841