Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Connecting to a Junos OS Virtual Machine
To connect to a Junos OS virtual machine:
- Select Topologies > Access Active Topologies.
Note: If you have access to only one topology, the Access Active Topology window appears.
If you have access to more than one topology, a dialog box appears, prompting you to select an active topology.
- Click the Virtual Machine tab to display connection
information to the console port and management Ethernet (ge 0/0/0)
of your virtual machines, as shown in Figure 1.
Figure 1: Virtual Machine Connection Information
- Either telnet to the console port or SSH to the management IP address of the virtual machine.
- If you connect to a Junos OS product, you will see a CLI prompt. Log in using root (for VMX device) or juniper (for all other devices) as the username and Clouds as the password.
- Enter cli to start using the Junos OS environment.
- Make configuration changes in edit mode, then commit to implement the changes on the Junos OS device.
