Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Using the Connectors Tab

    The Connectors tab shows the points in the private topology to which you can connect a Junosphere Connector tunnel (and thereby connect an external physical network to the virtual topology), as shown in Figure 1. Select a connector to view the details in the Ports window. This tab also shows virtual distributed Ethernet (VDE) information that you might need for troubleshooting.

    Select Topologies > Access Active Topologies and click the Connectors tab in the Details section at the bottom of the work space.

    Figure 1: Connectors Tab

    Connectors Tab

    The Ports section of the tab shows details of traffic between a chosen Junosphere connector and a physical device. The page includes the following fields:

    • Port—Virtual interface ID on each bridge to which the connector is attached.
    • Packets In—The incoming traffic, in packets.
    • Bytes In—The incoming traffic, in bytes.
    • Packets Out—The outgoing traffic, in packets.
    • Bytes Out—The outgoing traffic, in bytes.
    • Address—The address of the port.

    Published: 2013-08-15