Images

Junosphere provides a range of virtual machine image files, depending on the services you purchased. Current virtual image files for this release are listed in Table 1. See the virtual machine image descriptions in the online help for information about using and installing the images.

Table 1: Current Virtual Machine Images

Image Name

Description

Technical Support Provider

VJX1000_LATEST

Latest qualified VJX1000 image using Junos OS Release 12.3

Juniper Technical Assistance Center (JTAC)

VJX1000_12_1

Junos OS Release 12.1 for VJX1000

Not supported by JTAC

VJX1000_11_4

Junos OS Release 11.4 for VJX1000

Not supported by JTAC

VJX1000_10_3R2_3

Junos OS Release 10_3R2_3 for VJX1000

Not supported by JTAC

VJX1000_10_3R2_2

Junos OS Release 10_3R2_2 for VJX1000

Not supported by JTAC

VJX1000_10_3R2_1

Junos OS Release 10_3R2_1 for VJX1000

Not supported by JTAC

VJX1000_10_3R2_0

Junos OS release 10_3R2_0 for VJX 1000

Not supported by JTAC

BGP_SERVICE

Latest qualified BGP Service image. This is a special configuration of VJX that is used for BGP Service, based on the latest Junos OS release.

JTAC

SPACE_LATEST

Latest qualified Junos Space image. This currently maps to SPACE_12_3P2_8

JTAC

SPACE_12_2R1_3_APPS

Junos Space 12.2 Release 1.3 pre-installed with Ethernet Design, Security Design, Network Activate.

JTAC

CaridenMATE_LATEST

Latest qualified Cariden MATE image. This currently maps to Cariden MATE 4.5.1

Cariden

CENTOS_5_3

CentOS 32-bit image

NA

CENTOS64_5_4

CentOS 64-bit image

NA

MU_STUDIO_LATEST

MU_TESTENGINE_LATEST

Latest qualified Mu Studio and Test Engine images. This currently maps to Mu Studio 6.1

Mu Dynamics

PUPPET_MASTER_LATEST

Latest qualified Puppet Master image. This currently maps to Puppet Labs release 2.7. This is only compatible with VMX images.

Puppet Labs

REX_LATEST

Latest qualified Virtual Route Explorer image This currently maps to REX_9_4.

Packet Design

SPIRENT_LATEST

Latest qualified Virtual Spirent TestCenter image. This currently maps to SPIRENT_4_30. You must upgrade your application to Virtual Spirent TestCenter 4.30.

Spirent

VPTX_LATEST

Latest qualified VPTX image.

NA

VSRX_LATEST

Latest qualified VSRX image.

NA

WANDL_LATEST

Latest qualified WANDL release 6.0.2 image.

Wide Area Network Design Laboratory

Table 2: Unqualified Junos Releases

Image Name

Description

Technical Support Provider

VMX_LATEST

Latest unqualified VMX 12.3 image.

NA

These images have newer versions available, but are still supported by Junosphere for upgrade or legacy testing.

VJX1000 Image

By default, the VJX image is configured with a root and non-root user account. The root username is root and the password is Clouds. The non-root username is juniper and the password is Clouds. Each VJX image has 2 GB of memory.

Customers running VJX1000 virtual machines based on Release 12.1 of Junos OS for J Series routers will see new messages during boot up and during commit. The messages will be of the form:

/config/license/JNX_LICENSE_TMP.lic:1:(0) JNX_LICENSE_TMP: serial number too large

These messages are benign and can be safely ignored.

VJX1000 Image Features

For Junos OS Release 12.3, the VJX1000 image supports the features found in the VJX1000 Release Notes.

For Junos OS Release 12.3, the VJX1000 image supports the following software services:

BGP Services Image

This release has support for the BGP_SERVICES image.

Please note that the IPv6 BGP feed is not supported for the current release in Junosphere.

Cariden MATE Image

This release has support for the Cariden MATE 4.5.1 image.

CentOS Image

This release supports two CentOS Linux versions:

The CentOS virtual machine images contain iperf, mgen, and wireshark applications.

iperf is a network testing tool that can create TCP and UDP data streams and measure the throughput of a network that is carrying them.

mgen is open source software that provides the ability to perform IP network performance tests and measurements using TCP and UDP/IP traffic.

wireshark is an open source network protocol analyzer.

Junos Space Image

This release supports three versions of Junos Space:

To use Junos Space in your network topology, refer to the online help file located on the Junosphere.net welcome page.

Mu Studio and Mu Test Engine Images

This release has support for Mu Studio and Mu Test Engine from Mu Dynamics (version 6.1 for both). These tools enable you to quickly and accurately recreate thousands of different applications to determine how they impact the network infrastructure from a performance and security perspective.

Packet Design REX Images

This release includes support for the REX_LATEST (Version 9.4) Packet Design Route Explorer image.

Puppet Labs

This release includes support for the latest Puppet Master image (Version 2.7). It is compatible with only VMX images.

Virtual Spirent TestCenter Image

This release includes support for Virtual Spirent TestCenter 4.30. To use the Spirent 4.30 virtual machine, you will have to update your version of Spirent TestCenter. This image fixes the bug where you had to reset the Spirent virtual machine for it to become useable. Spirent TestCenter uses only one port.

VPTX

This release includes support for the VPTX latest image.

VSRX

This release includes support for the VSRX latest image.

VMX

This release includes support for the latest experimental VMX image.

VJX1000 Image Network Interfaces

For Junos OS Release 12.3, the VJX1000 image supports Gigabit Ethernet as a physical interface.

VJX Image for Junos OS Release 12.3

The VJX1000_LATEST image is based on Junos OS Release 12.3.

WANDL

This release includes support for the WANDL release 6.0.2 image.