Help Center User GuideGetting StartedFAQRelease Notes
 
X
User Guide
Getting Started
FAQ
Release Notes
Contents  

Installation and Upgrade Instructions


This section contains the procedure to upgrade Junos Space Security Director and Log Collector.

Basic Procedure for Upgrading to Security Director Release 15.2R2

Before you upgrade the Security Director, Log Director, and Security Director Logging and Reporting modules, you must upgrade to Junos Space Network Management Platform Release 15.2R2.

You can upgrade to Junos Space Network Management Platform Release 16.1R2 and Security Director Release 16.1R2 from the following releases:

Upgrading Security Director

Note: If you are upgrading from a previous version of Security Director, clear your browser cache before accessing the Security Director UI.

To upgrade Security Director Release 15.2R2:

Upgrading Log Collector

You can upgrade Log Collector from 15.6R2 to Log Collector 16.1R2. To upgrade from Log Collector 15.2R2 to Log Collector 16.1R2:

  1. Download the Log Collector Upgrade Image for VM from the Download Site.
  2. Copy the rpm file nwscripts-1-2.noarch.12.rpm to each Log Receiver node, Log Indexer, or Log Receiver and Indexer node.
  3. Upgrade each Log Receiver node, Log Indexer, or Log Receiver and Indexer node using the rpm –Uvh nwscripts-1-2.noarch.12.rpm command.

Note: Upgrading Log Collector from 15.1 to Log Collector 15.2 is not supported.

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit