Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Modifying Individual Service Instances and Deploying to Devices

 

You can modify individual service instances, such as ADC, TLB, CGNAT, or SFW services, and create a deployment plan for such services using the Service Edit option in task pane in Gateway View of Deploy mode.

Modifying Service Instances

On the Service Designer page, you can view the collection of service templates defined for several applications, such as stateful firewall or CGNAT.

To modify service template instances, such as ADC, SFW, CGNAT, or TLB templates:

  1. From the View selector, select Gateway View. The workspaces that are applicable to this view are displayed.
  2. From the Junos Space user interface, click the Deploy icon on the Edge Services Director banner.

    The functionalities that you can configure in this mode are displayed in the task pane.
  3. From the task pane, select Deploy Service > Service Edit.

    The Service Instances page is displayed in the right pane, listing all the previously defined service templates.

  4. From the View pane, perform one of the following tasks:
    • Click the ADC button.

      The list of ADC service templates is displayed. You need not click this button if you are launching the Service Designer page for the first time or are navigating to this page from another mode or a different page. You need to click this button only if you are viewing the other service templates, such as CGNAT or TLB.

    • Click the SFW button.

      The list of SFW templates is displayed.

    • Click the TLB button.

      The list of TLB templates is displayed.

    • Click the CGNAT button.

      The list of CGNAT templates is displayed.

  5. In the main window, click the plus sign (+) next to the SDG pairs to expand the tree and view the pair of devices in the SDG group or pair. Select the check box next to the SDG pair or individual SDG for which you want to modify settings. In an SDG pair, you can select a single SDG or both the SDGs in the in the redundancy pair of devices.Note

    Alternatively, you can also modify service templates from Service View in Build Mode by selecting the Service Templates > Manage Service Templates from the task pane, selecting a service instance, and clicking the Modify button.

  6. Click the Lock icon above the table of listed packet filters. The Select Reference Config dialog box is displayed.
    Figure 1: Select Reference Config Dialog Box
    Select Reference Config Dialog Box
  7. Open the Modify menu above the list of templates to modify an existing template, and select the component or service attribute, such as application or rule, that you want to edit.
  8. Modify the service attributes, as needed, and save the changes.

Creating a Deployment Plan

You must have previously defined service templates and policy or filter templates before you can create a deployment plan.

To create a deployment plan and assigning devices to it:

  1. From the View selector, select Gateway View. The workspaces that are applicable to this view are displayed.
  2. From the Junos Space user interface, click the Deploy icon on the Edge Services Director banner.

    The functionalities that you can configure in this mode are displayed in the task pane.
  3. From the task pane, select Service Edit.

    The Manage Service Templates page is displayed.

  4. From the View pane, perform one of the following tasks:
    • Click the ADC button.

      The list of ADC service templates is displayed. You need not click this button if you are launching the Service Designer page for the first time or are navigating to this page from another mode or a different page. You need to click this button only if you are viewing the other service templates, such as CGNAT or TLB.

    • Click the SFW button.

      The list of SFW templates is displayed.

    • Click the TLB button.

      The list of TLB templates is displayed.

    • Click the CGNAT button.

      The list of CGNAT templates is displayed.

  5. In the main window, click the plus sign (+) next to the SDG pairs to expand the tree and view the pair of devices in the SDG group or pair. Select the check box next to the SDG pair or individual SDG for which you want to modify settings. In an SDG pair, you can select a single SDG or both the SDGs in the in the redundancy pair of devices.
  6. Click the down arrow in the Actions menu and select Send for Deployment to create a deployment plan for the particular service template and save the plan.

    The Deployment Plan Summary dialog box appears, with the service name, type, and status listed.

    Click Send to create a deployment plan.

    A deploy plan is created for the service template with the devices that are assigned to it when you view the Deployment Plans page.

  7. Alternatively, you can select Discard changes from the Actions menu to ignore the modifications done to a policy or filter template.
  8. From the Deployment plans page, you can select Reject or Approve from the Actions drop-down list to reject or approve the deployment plan and make it available for commissioning to the devices.