Optical ILA Power Supply LEDs
Each optical ILA power supply has two LEDs on the power supply faceplate. Figure 1 shows the location of the LEDs on an optical ILA AC power supply. Figure 2 shows the location of the LEDs on an optical ILA DC power supply.
1 — DC OK | 2 — AC OK |
1 — DC OUT OK | 2 — DC IN OK |
Use Table 1 and Table 2 to interpret the state of the power supply LEDs.
Table 1: Optical ILA AC Power Supply LED
Name | Color | State | Description |
---|---|---|---|
DC OK (left side of FRU panel) | Unlit | Off | There is no power to any of the power supplies. |
Green | Blinking (1 Hz) | The power supply is present and only on standby mode. | |
On steadily | The power supply output is on and operating correctly. | ||
Red | On steadily | There is a power supply failure. | |
Blinking (0.5 Hz) | No AC power to this power supply only. | ||
AC OK (right side of FRU panel) | Unlit | Off | There is no power to any of the power supplies. |
Green | On steadily | The power supply is present and only on standby mode. | |
On steadily | The power supply output is on and operating correctly. | ||
Red | On steadily | There is a power supply failure. | |
Blinking (0.5 Hz) | No AC power to this power supply only. |
Table 2: Optical ILA DC Power Supply LED
Name | Color | State | Description |
---|---|---|---|
DC OUT OK (left side of FRU panel) | Unlit | Off | There is no power to the power supplies. |
Green | On steadily | The power supply DC output is on and operating correctly. | |
Blinking ((1 Hz)) | The power supply is present and on standby mode. | ||
Red | On steadily | There is a power supply failure. | |
Blinking (0.5 Hz) | There is no DC power to this power supply only. | ||
DC IN OK (right side of the FRU panel) | Unlit | Off | There is no power to the power supplies. |
Green | On steadily | The power supply is present and on standby mode. | |
On steadily | The power supply DC output is on and operating correctly. | ||
Red | On steadily | There is a power supply failure. | |
Blinking (0.5 Hz) | There is no DC power to this power supply only. |