Viewing the Device Inventory Page in Device View of Connectivity Services Director
The Device Inventory page lists devices managed by Connectivity Services Director and provides basic information about the devices, such as IP address and current operating status. The Device Inventory page is available in Build and Deploy mode and is the default landing page for Build mode.
The scope you have selected in the View pane and the network view that you have selected from the View selector determines which devices are listed in the Device Inventory page. For example:
If you are in the Device View and select My Network, all devices managed by Connectivity Services Director are listed.
The Device Inventory page provides three pie charts that summarize the status of the devices in your selected scope:
Devices by Family—Indicates the proportion of devices in each device family.
Connection State—Shows the proportion of devices that are up or down. In this chart, Virtual Chassis count as one device.
Configuration State—Shows the proportion of devices in each configuration state. See the Config State entry in Table 1 for definitions of the configuration states.
Mouse over a pie segment to view the actual number of devices and the percentage represented by that pie segment.
Table 1 describes the fields in the Device Inventory table.
Table 1: Fields in the Device Inventory Table
Configured name of the device or IP address if no hostname is configured.
IP Address of the device.
Serial number of device chassis.
Model number of the device.
Operating system version running on the device.
Device family of the device, such as JUNOS for MX Series routers.
Type of the device:
Connection status of the device in Connectivity Services Director:
Displays the configuration status of the device:
Displays if the device is directly manageable or not.
This is a hidden field. To display the Manageability State field, click any column, click the down arrow to expand the list, select Columns from the list, and then enable Manageability State.
Juniper Networks devices require a license to activate the feature. To understand more about Connectivity Services Director Licenses, see, Licenses for Network Management. Please refer to the Licensing Guide for general information about License Management.