Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 

Known Issues

This section lists the known issues in Connectivity Services Director Release 3.0R1. For the most complete and latest information about known Junos Space Connectivity Services Director defects, use the Juniper Networks online Problem Report Search application.

  • ACX5448 supports provisioning of only basic E-Line and LSP services on Junos OS Release 18.2.

    ACX5448 does not support provisioing E-LAN and IP service types on Junos OS Release 18.2. [PR 1367398]

  • While provisioning IP services, the Service Order details window displays an MTU Factor that is different from the value configured in the Service Definition. [PR 1343753]

  • The Service Transport and Service Traffic tabs in the Monitor mode are unavailable until you refresh the web page. [PR 1343847]

  • While modifying an E-LAN service, the java.lang.IllegalArgumentError occurs when you filter and delete all the templates associated with a site of an E-LAN service. [PR 1346651]

  • While creating an E-LAN service, an error message indicating that a VLAN ID could not be allocated is displayed when you delete an existing Integrated Routing and Bridging (IRB) interface and add another IRB interface from the same device.

    The same error occurs while you delete a node from which the IRB interface is used and use an IRB from another node. [PR 1346939]

  • While deploying an IP service, the devices that you select in the Site Settings page are deleted if you do not choose an interface for the selected devices.

    However, the device entries are visible in the node settings page. [PR 1347222]

  • When an E-LAN service order is created with virtual-switch, evpn, and BGP as the instance, protocol, and signaling types respectively, the Spoke and Mesh Settings column is displayed under the node settings tab.

    The Spoke and Mesh Settings is not valid for an E-LAN service order and therefore displayed. [PR 1350036]

  • Unable to create an ELAN service order when you select port-to-port for VLAN Tagging Type and Normalize to VLAN All for VLAN Normalization. [PR 1354344]

  • The View Configuration window displays interfaces that you delete from a service order configuration. [PR 1355515]

  • LSP names are not displayed in the Path Settings page of the Create LSP Service Order wizard.

    Workaround:Click Cancel and recreate the LSPs if the LSP names are not displayed. [PR 1364812]

  • The Deploy Service Job details for dss window, opened from the CSD Deployment Jobs page, of an LSP service displays duplicate device entries. [PR 1366433]

  • While upgrading Connectivity Services Director Release 2.1, installed on Junos Space Platform Release 17.1R1, to Connectivity Services Director Release 2.2, installed on Junos Space Platform Release 17.2R1 or Release 18.1R1, the upgrade job goes to InProgress state and never completes. [PR 1345732]

    Workaround: A timeout is introduced in the CSD installation script.

    As a result, the upgrade of Connectivity Services Director, from Release 2.1 to Release 2.2 is completed. However, you must restart jboss by executing the following commands after the upgrade job is completed:

    Service jmp-watchdog stop

    Service jboss-dc stop

    Service jboss stop

    Service jmp-watchdog start

Modified: 2018-06-24