Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Viewing Services

    The following topic describes how to view services:

    Viewing Services in a Table

    To view the services inventory in a table:

    1. Select Service View from the View Selector. The workspaces that are applicable to routing and tunnel services are displayed.
    2. From the Junos Space user interface, click the Deploy icon in the Connectivity Services Director banner. The functionalities that you can configure in this mode are displayed in the task pane.
    3. From the View pane, click the plus sign (+) to expand the tree and select the type of service.
    4. Click the plus sign (+) beside Connectivity to view services based on protocols.
      • Expand the L3VPN Services tree to select a Layer 3 VPN Ethernet service.

      • Expand the P2P Services tree to select a point-to-point service.

      • Expand the VPLS Services tree to select a VPLS service.

    5. In the Network Services > Connectivity task pane, select Service Provisioning > Deploy Services.

      In the top half of the window on the right pane, the Manage Network Services page presents information on existing services in a table.

      The Manage Network Services page provides the following information about each service:

      Table 1 describes the fields in the service orders table.

      Table 1: Fields in the Services Table




      Name of the service order assigned during service creation or edit.

      Service Type

      One of the following:

      • Point-to-point pseudowire (LDP)

      • Point-to-point pseudowire (BGP)

      • VPLS (MultiPoint-to-MultiPoint)

      • VPLS (Point-to-MultiPoint)

      • L3VPN (Full Mesh)

      • L3VPN (Hub-Spoke 1 Interface)


      Name of the enterprise customer who placed an order for the service.

      Deployment State

      State of the service:

      • Active—Denotes a service that has been deployed and is in an active state (enabled).

      • Inactive–Denotes a service that has been deployed and is in a deactivated state (disabled.

      • Pending—Denotes a service for which deployment of the service to a device is pending to be performed.

      • Failed—An attempt to modify the service failed.

      FA Status

      Status of functional audit of the service.

      Fault Status

      Fault management status of the service.

      SLA Status

      Service-level agreement status of the service. If data exceeds the threshold value specified in the Threshold Alarm Profile, the system generates a threshold alarm. The value in the SLA Status column changes to SLA Violated. If the data does not cross the threshold value specified in the Threshold Alarm Profile, the value in the SLA Status column changes to SLA Violation Cleared.

      PM Status

      Performance management status of the service.


      Name of the service definition upon which the service order is based.

      Activation Date

      Date and time at which the service order was last activated.

      Last Modified Time

      Date and time at which the profile was last updated.

    6. To restrict the display of services, enter a search criterion of one or more characters in the search bar and press Enter. All services that match the search criterion are shown in the main display area.
    7. To view details of a specific service, double-click the table row that summarizes the service.

      For a VPLS service (point-to-multipoint or multipoint-to-multipoint), a table of service details appears.

    8. Select the check box beside a service to launch the Manage Service Orders page in the lower half of the pane. The service orders associated with the selected service are displayed. You can perform different actions, such as validating or discarding configuration.

    Modified: 2017-09-13