Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Related Documentation


    Deploying a Layer 3 VPN Service Order

    You must deploy a service for it to run on devices in the network.

    To deploy the service, make selections from the Manage Service Orders window.

    1. Select Service View from the View Selector. The workspaces that are applicable to network and tunnel services are displayed.
    2. From the Junos Space user interface, click the Deploy icon in the Connectivity Services Director banner. The functionalities that you can configure in this mode are displayed in the task pane.
    3. From the View pane, click the plus sign (+) to expand the tree and select the type of service.
    4. Click the plus sign (+) beside Connectivity to view services based on protocols.
      • Expand the L3VPN Services tree to select a Layer 3 VPN Ethernet service.

      • Expand the P2P Services tree to select a point-to-point service.

      • Expand the VPLS Services tree to select a VPLS service.

    5. From the Tasks pane, select Service Provisioning > Deploy Services.

      The Manage Network Services page is displayed in the top half of the right pane, which displays all of the configured services. The Manage Service Orders page is displayed in the bottom half of the right pane, which displays all of the service orders corresponding to a service.

      Figure 1: Manage Service Orders Page

      Manage Service Orders Page
    6. Select the check box next to an L3VPN service in the Manage Network Services page. The corresponding service orders for the selected service are displayed in the Manage Service Orders page in the lower half of the main display area.
    7. Select the check box next to the L3VPN service order you want to deploy.
    8. Perform one of these actions from Deploy mode in the Service View of Connectivity Services Director :
      • To deploy the service immediately, select Deploy now and then click OK.

      • To deploy the service later, select Schedule deployment, select a date and time, and then click OK.

        The time field specifies the time kept by the server, but in the time zone of the client.

      • To validate the service, click Validate.

    9. Use the Deploy Configuration page to view the job and monitor the status of the service deployment.

    Related Documentation


    Modified: 2017-09-13