Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- ACX Series
- Example: Base Configuration for N-PE Device in a Multipoint Service
- Example: Base Configuration for N-PE Device in a Point-to-Point Ethernet (LDP) Service
- Junos Space
- Example: Base Configuration for N-PE Device in a Multipoint Service
- Example: Base Configuration for N-PE Device in a Point-to-Point Ethernet (LDP) Service
- M Series
- Example: Base Configuration for N-PE Device in a Multipoint Service
- Example: Base Configuration for N-PE Device in a Point-to-Point Ethernet (LDP) Service
- MX Series
- Example: Base Configuration for N-PE Device in a Multipoint Service
- Example: Base Configuration for N-PE Device in a Point-to-Point Ethernet (LDP) Service
- PTX Series
- Example: Base Configuration for N-PE Device in a Multipoint Service
- Example: Base Configuration for N-PE Device in a Point-to-Point Ethernet (LDP) Service
Example: Base Configuration for a P Router
P routers in your MPLS network must have the following entities configured before these devices are prestaged:
A Gigabit Ethernet interface to each router in the network
Loopback interface
MPLS protocol
OSPF protocol
LDP protocol
Figure 1 shows a simple network with one P router connecting five N-PE routers.
Figure 1: Connectivity in a Simple Network
The following example shows a P router configuration for the simple network shown in Figure 1.
interfaces {
ge-0/0/2 {
unit 0 {
family inet {
address 10.1.14.1/30;
}
family mpls;
}
}
ge-0/0/3 {
unit 0 {
family inet {
address 10.1.15.2/30;
}
family mpls;
}
}
ge-5/0/0 {
unit 0 {
family inet {
address 10.1.17.1/30;
}
family mpls;
}
}
ge-5/0/1 {
unit 0 {
family inet {
address 10.1.18.1/30;
}
family mpls;
}
}
lo0 {
unit 0 {
family inet {
address 192.168.1.1/32;
}
}
}
}
}
protocols {
mpls {
interface ge-0/0/2.0;
interface ge-0/0/3.0;
interface ge-5/0/0.0;
interface ge-5/0/1.0;
interface lo0.0;
}
ospf {
traffic-engineering;
area 0.0.0.0 {
interface ge-0/0/2.0;
interface ge-0/0/3.0;
interface ge-5/0/0.0;
interface ge-5/0/1.0;
interface lo0.0 {
passive;
}
}
}
ldp {
interface ge-0/0/2.0;
interface ge-0/0/3.0;
interface ge-5/0/0.0;
interface ge-5/0/1.0;
}
}Related Documentation
- ACX Series
- Example: Base Configuration for N-PE Device in a Multipoint Service
- Example: Base Configuration for N-PE Device in a Point-to-Point Ethernet (LDP) Service
- Junos Space
- Example: Base Configuration for N-PE Device in a Multipoint Service
- Example: Base Configuration for N-PE Device in a Point-to-Point Ethernet (LDP) Service
- M Series
- Example: Base Configuration for N-PE Device in a Multipoint Service
- Example: Base Configuration for N-PE Device in a Point-to-Point Ethernet (LDP) Service
- MX Series
- Example: Base Configuration for N-PE Device in a Multipoint Service
- Example: Base Configuration for N-PE Device in a Point-to-Point Ethernet (LDP) Service
- PTX Series
- Example: Base Configuration for N-PE Device in a Multipoint Service
- Example: Base Configuration for N-PE Device in a Point-to-Point Ethernet (LDP) Service
