Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
Sample XPath Notifications Received on Devices for CFM Profiles Associated with a P2P Service
This topic illustrates the differential configuration, which is the delta or the change-set of the configuration that you are about to deploy on the devices, and the XPath attributes associated with the delta configuration for CFM profiles associated with a point-to-point service:
The following is the changed XPath attribute for CFM profiles of a point-to-point service:
/configuration/protocols/oam/ethernet/connectivity-fault-management/maintenance-domain/
maintenance-association/continuity-check/loss-threshold
The following is the configuration difference corresponding to the XPath attribute for CFM profiles associated with a point-to-point service:
<protocols op="U">
<oam op="U">
<ethernet op="U">
<connectivity-fault-management op="U">
<maintenance-domain op="U">
<name>Default-Domain</name>
<level>1</level>
<maintenance-association>
<name>PW_1001_P2P-CFM992015-12-30-05</name>
<continuity-check>
<interval>1s</interval>
<loss-threshold>3</loss-threshold>
<hold-interval>10</hold-interval>
</continuity-check>
<mep>
<name>1</name>
<interface>
<interface-name>ge-0/0/5.1</interface-name>
</interface>
<direction>up</direction>
<auto-discovery/>
<lowest-priority-defect>all-defects</lowest-priority-defect>
</mep>
</maintenance-association>
<maintenance-association>
<name>PW_101_P2P-Asym-CFM2015-12-30-</name>
<continuity-check>
<interval>1s</interval>
<loss-threshold>3</loss-threshold>
<hold-interval>10</hold-interval>
</continuity-check>
<mep>
<name>3</name>
<interface>
<interface-name>ge-0/0/4.0</interface-name>
</interface>
<direction>up</direction>
<auto-discovery/>
<lowest-priority-defect>all-defects</lowest-priority-defect>
</mep>
</maintenance-association>
<maintenance-association op="U">
<name>PW_221_P2PService1</name>
<continuity-check op="U">
<interval>1s</interval>
<loss-threshold op="U">5</loss-threshold>
<hold-interval>10</hold-interval>
</continuity-check>
<mep>
<name>1</name>
<interface>
<interface-name>ge-0/0/2.0</interface-name>
</interface>
<direction>up</direction>
<auto-discovery/>
<lowest-priority-defect>all-defects</lowest-priority-defect>
</mep>
</maintenance-association>
</maintenance-domain>
</connectivity-fault-management>
</ethernet>
</oam>
</protocols>
