Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Reactivating a CFM Service

    After you disable a service to deactivate the configuration settings on devices mapped to the service, you might require the service settings to be reenabled after you have modified the service parameters, either directly on the device or using the Connectivity Services Director application. In such a case, you can use the reactivation functionality to revive and activate the service properties on devices. To disable a service, the service must not contain any pending or uncommitted changes. Also, the service must be in the Deactivated state.

    To reactivate a service:

    1. From the View selector, select Device View.

      The workspaces that are applicable to this view are displayed.

    2. From the Junos Space user interface, click the Deploy icon on the Connectivity Services Director banner.

      The functionalities that you can configure in this mode are displayed in the task pane.

    3. From the View pane, click the plus sign (+) beside the My Network item in the View pane to expand the tree and select the device node you want for which you want to create the LFM profile.

      The device type selected within the device model tree is highlighted.

    4. Select the check box beside a service to launch the Manage Service Orders page in the lower half of the pane. The service orders associated with the selected service are displayed. You can perform different actions, such as validating or discarding configuration.
    5. From the Tasks pane, select OAM > CFM .

      The top part of the right pane displays the Manage CFM Services page, with the table of services, and the bottom part of the right pane displays the Manage CFM Service Orders page, with the table of service orders.

    6. From the Manage CFM Services page, select the check box next to the service you want to reactivate.
    7. Click the down arrow on the Action menu, above the table of listed service orders, and select Reactivate to reenable the selected service order. A dialog box is displayed prompting you to confirm your action.
    8. Do one of the following in the Confirmation dialog box:
      • To reactivate the service immediately, select Reactivate now, and click Yes. If you click Yes, the selected service is activated immediately. Alternatively, if you click No, the deactivate operation is discarded.
      • To reactivate the service at a later time, select Reactivate later, and select a date and time for reactivating, then click OK. The time field specifies the time kept by the server, but in the time zone of the client.
    9. Use the Jobs workspace to monitor the outcome of the deployment.

    Modified: 2016-03-03