Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Attaching a CFM or LFM Action Profile

    This action attaches a CFM or LFM action profile to one or more maintenance endpoints (MEPs) or devices at a time. After you create a CFM or LFM action profile, you must apply the profile to MEPs for the properties, such as events and actions configured in the profile to take effect.

    To attach a CFM or LFM action profile:

    1. From the View selector, select Device View.

      The workspaces that are applicable to this view are displayed.

    2. From the Junos Space user interface, click the Build icon on the Connectivity Services Director banner.

      The functionalities that you can configure in this mode are displayed in the task pane.

    3. From the View pane, click the plus sign (+) beside the My Network item in the View pane to expand the tree and select the device node you want for which you want to attach the CFM or LFM action profile.

      The device type selected within the device model tree is highlighted.

    4. From the Tasks pane, select the name of the profile that you want to create. To attach or detach a CFM or LFM action profile for a device, select Profiles > OAM.

      The Manage OAM Profiles page is displayed.

    5. Select the check box next to the CFM or LFM action profile that you want to associate with a device.

      The device for which the CFM or LFM action profile must be associated is selected.

    6. Click the down arrow in the Actions menu, above the table of listed profiles, and select Attach to apply the profile to an MEP or device.

      The Attach Profile dialog box is displayed.

      Note: In the Devices list, you cannot select the check box of a device, if an action profile is already attached to a device. The application does not attach the action profile to those devices again.

    7. Select the check boxes next to the devices to which the CFM or LFM action profile must be applied, and click Attach

      The service corresponding to this action profile is modified to attach new devices (end points).

      Alternatively, click Cancel to discard the changes and return to the Manage OAM Profiles page.

    Modified: 2016-03-01