Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Creating a Multicast VPN Service Order

    This topic describes how to use the Connectivity Services Director application to create a Multicast VPN (MVPN) service order.

    Note: Multicast VPN services are supported on LN2600 and MX devices only.

    1. Select Service View from the View Selector. The workspaces that are applicable to network and tunnel services are displayed.
    2. From the Junos Space user interface, click the Deploy icon in the Connectivity Services Director banner. The functionalities that you can configure in this mode are displayed in the task pane.
    3. From the View pane, click the plus sign (+) to expand the tree and select the type of service.
    4. Click the plus sign (+) beside Connectivity to view services based on protocols.
      • Expand the L3VPN Services tree to select a Layer 3 VPN Ethernet service.

      • Expand the P2P Services tree to select a point-to-point service.

      • Expand the VPLS Services tree to select a VPLS service.

    5. From the Tasks pane, select Service Provisioning > Deploy Services.

      The Manage Network Services page is displayed in the top half of the right pane, which displays all of the configured services. The Manage Service Orders page is displayed in the bottom half of the right pane, which displays all of the service orders corresponding to a service.

    6. To select a service definition on which to base the new service order, from the Network Services page, select New > L3VPN Service Order.
    7. In the Service Parameters window, from the Select Service Definition field, select the service definition upon which you want to base your service order.
    8. In the Service Parameters window, enter the service attributes-related information in the relevant fields as described in the following table:

      Field

      Description

      Service Definition

      The service definition upon which this service order is based.

      Name

      Type a name for the service order.

      Customer

      Enter the customer for which you are creating the service order.

      Comments

      Enter comments to describe the service order (optional).

      MVPN

      If selected, this check box indicates that the service order is intended to function in a Multicast VPN. This check box is selected if it was selected in the service definition upon which this service order is based.

      VPN Settings

      The VPN settings listed in this panel correspond to the settings selected in the service definition upon which this service order is based.

      Autopick VLAN ID

      This check box is selected automatically if it was selected in the service definition upon which this service order is based.

      Autopick Hub Route Target

      This check box is selected automatically if it was selected in the service definition upon which this service order is based.

      Autopick Spoke Route Target

      This check box is selected automatically if it was selected in the service definition upon which this service order is based.

      Autopick Hub Route Distinguisher

      This check box is selected automatically if it was selected in the service definition upon which this service order is based.

      Autopick Spoke Route Distinguisher

      This check box is selected automatically if it was selected in the service definition upon which this service order is based.

      Autopick Interface IP Address

      This check box is selected automatically if it was selected in the service definition upon which this service order is based.

      VRF Table Label

      This check box is selected automatically if it was selected in the service definition upon which this service order is based.

      Export Direct Routes

      This check box is selected automatically if it was selected in the service definition upon which this service order is based.

      PE-CE Settings

      Routing Protocol

      OSPF/Static Route–This routing protocol corresponds to the protocol selected in the service definition upon which this service order is based.

      OSPF domain ID

      This field is optional.

      Range: 1.0.0.1 to 223.255.255.254 (excluding 127.x.x.x)

    9. Click Next.
    10. Select the device for which you want to implement the service order.
    11. Click Next.
    12. In the Site Settings window, enter information as described in the following table:

      Field

      Description

      Choose Endpoints

      Device

      Add the devices for which you intend to implement this service order.

      UNI Interface

      Select the interface on each device for which you intend to implement this service order.

      UNI Description

      Enter the description for the selected UNI interface. The Description field is displayed in Modify Service Order, View Service Order Details, Modify Service, and View Service windows. You can edit this field while modifying a Layer 3 VPN service order or service.

      Range: 0 through 128 characters

      Set loopback

      Select this check box to create a loopback interface for the service order.

      Note: If you provision a loopback interface for an L3VPN service, an operator is able to identify a VRF routing instance. Thereafter, an operator can manually ping a remote CE router from a local PE router.

      Encapsulation

      VLAN

      This field displays the value specified in the service definition upon which you are basing this service order.

      UNI interface

      Select the interface on the device for which you intend to implement this service order.

      Autopick interface IP

      This check box is selected automatically if it was selected in the service definition upon which this service order is based.

      IP pool type

      Global

      This field displays the value specified in the service definition upon which this service order is based.

      IP address pool

      Select the IP address pool from the list.

      IP block size

      This field displays the value specified in the service definition upon which this service order is based.

      Autopick VLAN ID

      This check box is selected automatically if it was selected in the service definition upon which this service order is based.

      Routing protocol

      BGP

      This field displays the value specified in the service definition upon which this service order is based.

      Autopick neighbor IP

      This check box is selected automatically if it was selected in the service definition upon which this service order is based.

      Peer AS

      The peer autonomous system number.

      Select a Peer AS from the list.

    13. Click Review.
    14. Click Finish to complete the creation of the service order.

    Modified: 2017-07-20