Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Deleting a Partial Configuration of an LSP Service Order

    A failed service order of type Provisioning can leave parts of the service configuration on the devices. To remove this partial configuration:

    1. From the View selector, select Service View. The workspaces that are applicable to routing and tunnel services are displayed.
    2. Click the Deploy icon in the Service View of the Connectivity Services Director banner. The functionalities that you can configure in this mode are displayed in the task pane.
    3. From the Service View pane, which is the left pane in the window, click the plus sign (+) next to Network Services to expand the tree and display the different service types that you can configure.
    4. Click the plus sign (+) beside Connectivity to view services based on protocols.
      • Expand the L3VPN Services tree to select a Layer 3 VPN Ethernet service.

      • Expand the P2P Services tree to select a point-to-point service.

      • Expand the VPLS Services tree to select a VPLS service.

    5. From the task pane, select Service Provisioning > Deploy Services. The top part of the right pane displays the Manage Network Services page, with the table of services, and the bottom part of the right pane displays the Manage Service Deployment page, with the table of service orders.
    6. From the Network Services > Connectivity task pane, select Service Provisioning > Deploy Services > service order name.
    7. In the Manage Service Deployment page, select the failed service order for which you want to delete the partial configuration.
    8. Open the Actions menu and select Delete Partial Configuration.
    9. In the confirmation screen, select Delete.

    Modified: 2017-07-20