Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Upgrading Junos Space

    Connectivity Services Director Release 2.0 is supported on Junos Space Network Management Platform Release 15.2R1. If your appliance is running the supported version of Junos Space, you can skip this procedure and begin installation of Connectivity Services Director.

    If your appliance is running a Junos Space release that is earlier than the supported release, you need to upgrade Junos Space before installing Connectivity Services Director. To determine the Junos Space release version and to upgrade Junos Space, follow these steps:

    1. Determine the installed Junos Space version:
      1. Log in to Junos Space by using the default username and password for Junos Space: super and juniper123.

        Junos Space opens the dashboard.

      2. Click the plus symbol (+) next to Administration to expand the Administration menu.
      3. Click Applications to list all of the applications installed.
      4. Note the version of the Network Management Platform or the Network Application Platform. (Some earlier versions of the Network Management Platform were named Network Application Platform.) If the currently installed release is a supported one, you can skip the rest of this procedure; if not, you must upgrade the Network Management Platform to a supported release.
    2. Determine how many releases you need to install to bring the software up to minimum requirements.

      Junos Space supports upgrades from the last two versions. For example, Junos Space Release 15.1 supports upgrading from Release 14.1 or 13.3. Upgrades from releases still earlier require multiple steps.

    3. Open a new browser page, log in to the Juniper customer support portal, and download the required Junos Space version to either the hard disk or to an SCP server. The Junos Space software images are located at https://www.juniper.net/support/downloads/?p=space.
    4. Return to your Junos Space session after the download completes.
    5. Upgrade Junos Space Network Management Platform to a supported release.

      Complete installation steps are provided at How Do I Upgrade Junos Space?.

    If Connectivity Services Director (CSD) Release 1.0R2.6 is installed on Junos Space Platform 15.1R1 and you try to upgrade to Junos Space Platform Release 15.2R1, the upgrade fails. This issue occurs because of a conflict between two RPM files.

    Workaround:

    1. Before upgrading Junos Space Platform, do the following:

      Note: If your Junos Space setup contains more than one node, you must perform these steps for all nodes in the fabric.

      1. Connect to the Junos Space VIP node (by using SSH) and log in (as the admin user) to access the Junos Space CLI.

        The Junos Space Settings Menu appears.

      2. Type 6 (if the node is a hardware appliance) or 7 (if the node is a virtual appliance) to open a debug (command) prompt.

        You are prompted to enter your password.

      3. Type the password for the admin user and press Enter.

        You are taken to the shell.

      4. Run the rpm -qa|grep jmp-csd command to determine the CSD RPM to uninstall. A sample output is as follows:
        [root@host ~]# rpm -qa|grep jmp-csd
            jmp-csd-1.0-367423
      5. Run the rpm -e --nodeps rpm-name command to uninstall the RPM, where rpm-name is the name of the RPM obtained in the preceding step.
      6. Run the rpm -qa|grep jmp-csd command to confirm that the RPM was uninstalled successfully. The command produces no output if the RPM was uninstalled successfully.
      7. Exit the shell and log out of the Junos Space VIP node.
    2. Upgrade Junos Space Platform from Release 15.1R1 to Release 15.1R2.
    3. After Junos Space Platform is upgraded successfully, reinstall the CSD RPM that you previously uninstalled:

      Note: If your Junos Space setup contains more than one node, you must perform these steps for all nodes in the fabric.

      1. Log in to the Junos Space CLI on the VIP node and access the shell.
      2. Run the /usr/bin/extract_image.sh -i /var/cache/jboss/jmp/Connectivity-Services-Director.1.0R2.6/Connectivity-Services-Director.1.0R2.6.img -s /etc/pki/jmp-softwareManager/certs/JunosSpaceSoftwareCA_v1.pem -t /etc/pki/jmp-softwareManager/certs/JunosSpaceTrusted_CAs.pem -d /home/admin/ command to extract the CSD RPM that you previously uninstalled from the CSD software image.

        The RPM is extracted to the /home/admin/Connectivity-Services-Director.1.0R2.6 directory.

      3. Run the rpm -ivh --force jmp-csd-1.0-367423.x86_64.rpm command to install the CSD RPM. A sample output follows.
        [root@space-0050569e39b6 ~]# rpm -ivh --force jmp-csd-1.0-367423.x86_64.rpm
              Preparing...                ########################################### [100%]
                1:jmp-csd                ########################################### [100%]
             File exists so just check for the strings     modprobe ip_conntrack_ftp present
             modprobe ip_conntrack_tftp present
             File exists so just check for the strings
             string present - so just replace the value
      4. Exit the shell and log out of the Junos Space VIP node.
    4. Reboot Junos Space Platform to finish the upgrade.

    Modified: 2016-06-09