Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Viewing the Configured Point-to-Point, L3VPN, and VPLS Services

    To view the services inventory in a table:

    1. Select Service View from the View Selector. The workspaces that are applicable to routing and tunnel services are displayed.
    2. From the Junos Space user interface, click the Build icon in the Connectivity Services Director banner. The functionalities that you can configure in this mode are displayed in the task pane.
    3. From the View pane, click the plus sign (+) to expand the tree and select the type of service.
    4. Click the plus sign (+) beside Connectivity to view services based on protocols.
      • Expand the L3VPN Services tree to select a Layer 3 VPN Ethernet service.

      • Expand the P2P Services tree to select a point-to-point service.

      • Expand the VPLS Services tree to select a VPLS service.

    5. With the Connectivity item selected in the View pane, from the Network Services > Connectivity task pane, select Service Provisioning > View Services.

      The View Network Services page is divided into two panes. The top pane provides a pictorial representation of the types of services, statuses of services, and audit-related information.

      Figure 1: View Network Services Page

      View Network Services Page

      In the View pane, if you select the Connectivity item in the tree under Network Services, without expanding the tree and selecting a specific service type, such as P2P Services, L3VPN Services, or VPLS Services, the top pane displays a set of five pie charts that enable you to view the different service orders configured, and their associated audit and monitoring statuses. The FA Status chart displays the functional audit status for the service orders. The Device State graph displays the statuses of devices on which services are being provisioned and commissioned. The Fault Status chart displays the connectivity fault management details for the service orders. The SLA Status chart displays the service-level agreement details for the service orders. The PM Status chart displays the performance management details for the service orders. The count or percentage of service orders in the pie chart segments sum up to the total number of configured service orders. Mouse over each segment of the pie to view the number corresponding to the percentage of service orders for each of the charts. These charts provide a visual overview of customers and service orders on your network, and enables you to quickly access related and commonly needed information. For example, you can check for failed service orders and then access a list of failed requests so you can begin to take restoration measure.

      In the View pane, if you do not expand the Network Services tree, and select the Network Services node in the View pane, the top pane displays a pie chart that enables you to view and examine the different services configured for devices, and the types of service protocols configured. The Services by Type graph displays the count of services for each type of service definition. Mouse over each segment of the pie to view the number of services corresponding to the percentage of service types. This chart provides a visual overview of customers and service orders on your network, and enables you to quickly access related and commonly needed information.

      The View Network Services page provides the following information about each service in the bottom pane:

      Table 1 describes the fields in the View Network Services table.

      Table 1: Fields in the Services Table

      Field

      Description

      Name

      Name of the service order assigned during service creation or edit.

      Service Type

      One of the following:

      • Point-to-point pseudowire (LDP)

      • Point-to-point pseudowire (BGP)

      • VPLS (MultiPoint-to-MultiPoint)

      • VPLS (Point-to-MultiPoint)

      • L3VPN (Full Mesh)

      • L3VPN (Hub-Spoke 1 Interface)

      Customer

      Name of the enterprise customer who placed an order for the service.

      Deployment State

      State of the service:

      • Active—Denotes a service that has been deployed and is in an active state (enabled).

      • Inactive–Denotes a service that has been deployed and is in a deactivated state (disabled.

      • Pending—Denotes a service for which deployment of the service to a device is pending to be performed.

      • Failed—An attempt to modify the service failed.

      FA Status

      Status of functional audit of the service.

      Fault Status

      Fault management status of the service.

      SLA Status

      Service-level agreement status of the service. If data exceeds the threshold value specified in the Threshold Alarm Profile, the system generates a threshold alarm. The value in the SLA Status column changes to SLA Violated. If the data does not cross the threshold value specified in the Threshold Alarm Profile, the value in the SLA Status column changes to SLA Violation Cleared.

      PM Status

      Performance management status of the service.

      Definition

      Name of the service definition upon which the service order is based.

      Activation Date

      Date and time at which the service order was last activated.

      Last Modified Time

      Date and time at which the profile was last updated.

    6. To restrict the display of services, enter a search criterion of one or more characters in the search bar and press Enter. All services that match the search criterion are shown in the main display area.
    7. To view details of a specific service, double-click the table row that summarizes the service.

      For a VPLS service (point-to-multipoint or multipoint-to-multipoint), a table of service details appears.

    Modified: 2015-11-22