Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Viewing Topology Map Link Details in a Pop-Up Dialog Box

    In the Topology View of Build mode, the upper portion of the page shows the topology map, which is the main display area. In this area, you can click or right-click the connecting lines, which represent the links that transmit traffic between devices, to view the link details. The pop-up menu is accessed by double-clicking in the center pane that shows the topology map. Mouse over a link on the map to display a pop-up menu for that link.

    For a specific zone and a set of devices in that zone, you can view the links connecting the devices. You can view the link details, such as the node identifier and the node IP address of the head end or originating router and the tail end or the destination router. These link details are useful for diagnosing and troubleshooting any link problems that cause traffic drops or loss in transmission of packets.

    Note: Right-clicking the map area displays a pop-up menu for more functions. You can move the map by holding down and dragging the left mouse button. You can zoom in and out by using the mouse scroll wheel. Double-click an element icon to collapse the devices or network elements and view the entire site or zone as an icon.

    To view link details in a pop-up dialog box:

    1. From the Junos Space user interface, click the Build icon on the Connectivity Services Director banner.

      The workspaces that are applicable to Build mode are displayed on the Tasks pane.

    2. From the View selector, select Topology View.

      The topology map of the sites or zones and the devices configured in each zone using the CSD-Topology is displayed.

    3. In the graphical representation of the topology displayed on the page, select the link by clicking the link or right-clicking the link for which you want to view details.

      The link is highlighted and displayed as a colored line.

    4. Mouse over a link and click the link to display a menu.

      When you mouse over a link, the name of the link is displayed on a pop-up menu. The following fields are displayed in the pop-up dialog box when you mouse over the link:

      • Operational Status—Status of the link, such as Up or Down

      • View Details—Detailed information about the selected link. Click the link in View Details to open a pop-up dialog box that displays these details.

    5. Click the View Details link from the pop-up menu.

      The Link Details pop-up dialog box is displayed on the right pane. The link details are displayed in a table as follows:

      • End A Device—Node ID of the LSP head end

      • End B Device—Node ID of the LSP tail end

      • End A IP—IP address of the LSP head end

      • End B IP—IP address of the LSP tail end

      • Operational Status—Whether the link is active (up) or inactive (down)

    6. Click the Close icon at the top-right corner of the pop-up dialog box to return to the topology map.

    Modified: 2016-08-29